craigslist | tools in dallas

Shaper (Dallas) $250

2009-12-30T21:32:40-06:00

Craftsman shaper with 1/2" shaft. With four cutters. Excellent condition--cast iron frame, steel base.

MN200 PISTORIOUS Framing miter machines (Garland) $2750

2009-12-30T21:21:47-06:00

I have two Pistorious MN200 miter machines for sale. I have completely refurbed them. they are production ready. photos are before and after. And this is not just a paint job. New belts bearings. fittings, and gone through completely. the price is each. I'm willing to negotiate based on need. Reply for a phone number to contact me. Cash or bank check only please.
I can deliver and even install within negotiation and distance.

Edger attachment (Rowlett) $15

2009-12-30T20:59:55-06:00

I'm selling an edger attachment. It is a universal edger that will fit any weedeater that takes attachments. I only used it for one season then bought a new edger and don't need this anymore.

Call 214.263.9430 if interested.

Thanks!

8' aluminum ladder (forney tx) $45

2009-12-30T20:45:19-06:00

8' aluminum ladder. $45 obo. don't need to take it to an apartment with 7' ceilings!

cash only

email or call 214 293-1543

DeWALT 18v XRP 4 TOOL COMBO KIT (Dallas) $360

2009-12-30T20:41:12-06:00

Brand new in case DE WALT 18V cordless XRP 4 tool Combo Kit comes with: hammer drill , Reciprocating Saw, Circular Saw,Flexible Light and 2 batteries and charger. call 214-414-4278 or e mail tono5110@yahoo.com

Trailer tilt top 6 x 12, 3500 lb rated axle, ATV, Cart, Mower (Melissa tx ) $650

2009-12-30T20:37:10-06:00

Offering 6 x 12 tilt top trailer, perfect for hauling mowers, atv, golf carts. No need to mess with heavy ramps, just pull the pin and tilt the bed up, drive on!! Will need wood floor replaced soon. Price is $650 cash.

Tom
214-673-7107

Delta 14 inch Bandsaw (Mesquite) $275

2009-12-30T20:26:37-06:00

Delta bandsaw for sale in great condition. I just dont have any use for it so call 214-240-8336 to discuss. 275 obo. See Specs below

Delta 28-275 Professional 14-Inch 3/4 Horsepower Open Stand Woodworking Band Saw, 120-Volt 1 Phase
�Nine-spoke precision-balanced wheels
�Full 16" x 16" cast-iron table tilts 45� right and 3� left for beveling operations
�Quick release tension lever
�4" integral dust port
�Cast-iron trunnions table support
�Capacity to cut stock up to 6-1/4" thick (12-1/4" with height attachment)
�Lower blade guides have sade, accurate, micrometer adjustment
�Lower guides angled to support blade to within 3/4" of table work surface -- ensures accurate cutting
�Fully-adjustable upper and lower blade guides and blade support
�Bearings maintain proper blade alignment
Delta 28-276 Band Saw Specifications
�Motor: 3/4HP
�Voltage: 120/240
�Hertz: 60
�Type: Single Phase
�Blade: Max. Width 3/4"
�Blade: Min. Width 1/8"
�Max. Length: 94"
�Min. Length: 91-1/2"
�Standard Length: 93-1/2"
�Capacity: Frame to Blade: 13-3/4"
�Under Guide and Wheel: 6-1/4"
�Speed: 3300 SFPM
�Table: Size 16" x 16"
�Groove: 3/8" x 3/4"
�Tilt: 45� R, 3� L
�Height: 42-3/4"
�Height 65-1/2"
�Width w/ Stand: 31"
�Front to Rear: 17-1/2"
�Weight: 201 lbs

quilts and table saw and cell phone (GREENVILLE TX) $100

2009-12-30T20:18:42-06:00

Quilt,cell phone sony ericsson and a table saw for sale call 903-461-8132

Lincoln MIG Accessories (lewisville, TX) $350

2009-12-30T20:17:05-06:00

Lincoln MIG Accessories comes with a NEWLincoln electric pro core 125, 140,180 MIG gun,NEW 2- 10' ground cable,NEW 2- ground clamp,NEW pare of gloves, 2- .035" flux wire, and a Smith gas regulator.

table saw (greenville.tx) $75

2009-12-30T20:05:08-06:00

Table saw 75.00 or best offer call 903-461-8132

DRY WALL FINISHING TOOLS (FERRIS TEXAS) $1500

2009-12-30T19:51:39-06:00

7,10,12,14 INCH BOXS, HANDLES ,PUMP, ANGEL ROLLERS AND GLAZERS EVERYTHING LESS BAZOOKA

DeWALT Rock Carbide 1" (Greenville Tx) $20

2009-12-30T19:44:54-06:00

Dewalt 1 " 25,40 mm
16" long
11" spline
Brand New in Box
I have 4 of them
New: $45

Call: James 972 880 8869

Jet 98" Parallel Woodworking Clamps - Brand New (Mount Vernon (East of Dallas)) $60

2009-12-30T19:39:54-06:00

Jet 98" Parallel Woodworking Clamps - Brand New $60.00 Each

Description:

The JET Parallel Clamps have unique features not found in regular clamps. The design allows for precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure which minimizes the tendency of warping and distortion of the workpiece. The movable jaw can be reversed to change the clamp into a spreader, which makes the Jet Parallel clamp a multi-purpose accessory for the woodshop.

Features:

90 Degree clamping at up to 1000 lbs. pressure
Precision-Rule� Measurement System for quick identification of opening capacity.
Slide-Glide Trigger for precise adjustments with SUMOGRIP� Handle for added comfort and increased power.
Reversible Clamping, converts clamp to a spreader
Non marring composite resin jaw faces

Specifications:

Clamp Capacity(In.): 98
Spread Capacity(in.): 105
Throat Depth(In.) 4-1/8
Clamp Pressure(lbs.): 1000

louisville 40' aluminum ladder (South east Dallas.) $150

2009-12-30T19:12:08-06:00

I have a louisville 40 rung aluminum ladder for sale I don't need anymore.
I paid $400 for the ladder new. If interested call or email. Thanx,
Paul. 214.642.1446

Dewalt Cordless Drill (Royse City ) $50

2009-12-30T19:00:44-06:00

Selling 18 volt DW929 3/8" VSR Dewalt Drill, Flashlight accessory, charger, and case for 50$. Battery not included.

Received this as a wedding gift. Lightly used around the house. Battery not included.

Contact Brian at 806-584-2257. Cash only please.

Craftsmen Table Saw (Corsicana) $100

2009-12-30T18:39:41-06:00

Craftsmen cast iron table saw with 2 extension, extra bales and adjustable dado, cash only please 540-840-6798

Grimmer Schmidt 175 air compressor (sanger) $2700

2009-12-30T18:36:25-06:00

Grimmer Schmidt 175 air compressor with monoblock ford gas engine, in working condition, skid mounted. asking $2700. trailer not included, if interested will sell for $400. Call David 214 284-9176

Homelite Generator (Corsicana) $400

2009-12-30T18:33:44-06:00

Homelite 5700/7125 gas generator, 2 120 and 1 240 plugs, run one time with wheels and handles Cash only please 540-840-6798

ammco brake shoe grinder (santa fe, nm) $600

2009-12-30T18:20:30-06:00

used for truing brake shoes to drum great cond 600.00 obo 505-470-1248

Impact napa air tool (north dallas) $125

2009-12-30T18:07:07-06:00

I have a air impact for sale its brand new in the box never used
i priced it out at napa and its worth 225 with tax so this is a very
good deal. 214-680-3888

HP TDS 48GX Data Collector (Mesquite) $850

2009-12-30T18:05:29-06:00

For sale, 1 HP TDS 48GX calculator with environment case,1 survey card , 1 memory card and 3 user guides.Data collector does need battery in memory card. Environment case has clip so no tray is needed.Call or text to 214-794-6962.

TIF 880 C/O COMBUSTABLE GAS DETECTOR (Dallas) $110

2009-12-30T17:53:09-06:00

$110 / OBO
NEVER USED!!
In box with brochures

call Steve @ 214-821-5052

18'x4' Business Sign (DALLAS) $350

2009-12-30T17:50:51-06:00

Im selling this sign because I went out of business last year and I'm trying to get rid of stuff I dont need & use.

Also I dont have where to put it and need to get rid of it ASAP.

The money would also help Asking $350 Cash Only

I also have banners available

For more information call 972-693-3087 Cindy

Hablo Espanol

Thanks for looking

sign, aluminuim, tire, shop, big, business, 18, 4, banner, espanol, carrollton, farmers branch, addison, dallas

Proto wrenches (mesquite) $350

2009-12-30T17:48:22-06:00

Proto wrenches for sale. Sizes 1 7/8, 1 13/16, 1 3/4, 1 11/16, 1 5/8. Almost brand new. $350 obo

Line-Ward Vibratory Plow (Pottsboro, Texas) $1800

2009-12-30T17:36:01-06:00

For sale vibratory plow model number L2 with tract Kohler Magnum 16hp-engine. Electric start. New battery. Carb overhaul. Runs great. Call with any questions or cash offers. Need to sell fast. (903).819.1393 Leave message.

SNAP-ON Electric Welder 220V (DALLAS ) $1150

2009-12-30T17:32:52-06:00

I have a Snap-On Welder that I have not used in a long time so i decided to sell instead to someone that will and Im also in need of the money.
Will trade for a nice broke horse for beginners or fencing material or ASKING $1150 Cash Only
Feel free to call if you have any questions 972-693-3087 Cindy
Hablo Espanol

carrollton, farmers branch, addison, dallas, fencing, horse, material, snap on, welder, welding, broke, 1150, 75220

compressor (athens) $1500

2009-12-30T17:32:46-06:00

QUINCY INDUSTRIAL COMPRESSOR ,VOLTS 208-230/460 7.5HP 120 GALLON TANK 3 PHASE
WILL TRADE FOR WIRE FEED WELDER 220 AND UP CAR, TRUCK ,4 WHEELERS ,GUNS
THIS COMPRESSOR RETAILS OVER 6K SO DONT TRY TO TRADE FOR NO JUNK .
903-675-5773 8-5 M-F 9-2 SAT

###RIDGID PIPE THREADER### (GRAPEVINE, TX 76051) $50

2009-12-30T17:23:59-06:00

ROGID 1 INCH PIPE THREADER WITH EXTRA SET OF DIES. CALL 817-691-5321

Air Compressor (Gast) (Emory)

2009-12-30T17:17:48-06:00

Like new Gast air compressor. Really nice and clean and mint condition. Cost over $1300.00 new sell for $600.00
Has a 20 gallon heavy duty tank.

call Jimmy 903-473-4252

Rubber auto ramps -- $20.00 (North Garland)

2009-12-30T16:32:52-06:00

Rubber auto ramps for changing oil, etc. -- $20.00
If interested, contact Larry, 214/403-7843

Machine for crankshaft straightening

2009-12-30T16:26:32-06:00

Looking for a crankshaft straightening machine for small engine work (lawnmowers). I do mower repair and the people in my area use their mowers for leveling, grading and cutting firewood, apparently. Please call or email me if you have a straightener you can sell me. Thanks for looking. 903-675-3083.

Light lite tower (Ennis) $950

2009-12-30T16:16:37-06:00

Needs work

call Michael 469-358-5947

Pressure washer (Ennis) $500

2009-12-30T16:15:25-06:00

Runs but needs work

call Michael 469-358-5947

10,000 Watt Generator (dal)

2009-12-30T16:13:33-06:00

new, never started.
50 amp, 220,110 ac, 12 vdc
electric start or manual start.
NO WHERE in this ad does it say, (best offer) NO WHERE.
750.oo------750.oo---------750.oo

electric chain hoist (8820 southwestern blvd) $1300

2009-12-30T16:09:35-06:00

CM electric chain hoist, very good condition, found in a abondoned storage building. missing the electric control box but can be replaced for very cheap.call 785 341 6007 or email me at bburback01@yahoo.com

Hoist with snatch block (Forney) $100

2009-12-30T16:09:18-06:00

Little Mule Model 300a come along hoist, has built on snatch block, like new

Craftsman stackable tool box (Garland) $150

2009-12-30T15:46:14-06:00

Red stackable tool box 2 piece set good condition call josh 972-480-2469

Marble Tile 6 boxes (garland) $150

2009-12-30T15:45:55-06:00

I have 6 boxes of marble tile beautiful. They were $50 a box I have no use for them. They will go fast asap call josh 972-480-2469

drag gun plasma cutter (ardmore) $500

2009-12-30T15:43:32-06:00

themal dynamics drag gun plasma cutter used very little in great shape made in usa 110 volt input built in compressor just plug and play great for sheet metal or body work thank you

Jacobs Super Ball Bearing Chuck repair kits (Lubbock)

2009-12-30T15:39:08-06:00

Genuine Jacobs Replacement Jaws and Nut kits to rebuild your 11N, 14N, 16N or 20N Jacobs Ball Bearing Super Chucks. These are brand new, sealed in the box kits complete with instructions. Each kit contains a set of three new jaws and a matching split nut. If your Super Chuck does not hold a bit true, it is time for this kit. Through-hardened jaws are center-ground for absolute straightness and alignment . Rebuild your Super Chuck to like new performance!

Prices are as follows:

Jacobs 7431 kit for the 11N. List is $90, best web price is $40, my price $36.

Jacobs 7432 kit for the 14N, List is $110, best web price is $50, my price $45.

Jacobs 7433 kit for the 16N, List is $130, best web price is $63, my price $55

Jacobs 7435 kit for the 20N, List is $230, best web price is $128, my price $116

I accept payment via USPS money orders, paypal or cash and any of these kits can ship anywhere in the USA for only $7

David
806-543-0980

Craftsman 19.2V C3 Cordless Drill Driver with Battery Charger (dallas) $55

2009-12-30T15:17:53-06:00

Condition: Brand New
Product Description
This Craftsman C3 19.2-Volt drill includes a powerful 3/8 in. Drill/Driver. The 19.2-Volt 3/8 in. drill's Variable Speed Motor (0 - 650 rpm) allows for low speeds when starting holes and high speeds for drilling. The 24 position clutch allows user to match power to the job. The 3/8 in. keyless chuck allows for easy bit changes and provides positive retention of 1/16 in. to 3/8 in. bits. The electric brake stops the chuck from turning when trigger is released. Ergonomic design handle with overmold for user comfort.
� Powerful motor driven by the 19.2-volt DieHard battery to provide the power for most drilling and driving needs.
� The keyless chuck provides quick and simple bit changes.
� Built in bubble level for vertical drilling and screw driving.
� The electric brake stops the chuck from turning when the trigger is released reducing the amount of time used in changing bits or placing a screw on the bit.
� The T-handle design with over-mold ensures balance, comfort and control.
� Built-in bit storage on the drill/driver provides an easily accessible drill bit to change as needed.
� The variable speed motor (0-650 RPMs) allows lower speeds for starting holes and higher speeds for drilling needs.
� The reversible function allows you to back out stuck bits or screws
� The 24 position clutch adjust to permit bit to slip at various torque settings. Clutch locks for drilling applications.

Specifications
Product Overview:
Item Weight: 6.1
General Warranty: 1 year
General Features:
Drill Type: Drill / driver
Chuck:
Capacity: 3/8 in.
Type: Keyless
Motor-Engine:
Motor Brake: Electric
Clutch Torque: Adjustable
Reversibility: Yes
Speed Range RPM: 0-650 rpm
Voltage: 19.2 volts
Controls, Overall:
Adj. Speed Dial: Yes
Convenience:
Built-In Bit Storage: Yes
Handles:
Main Type: T
Color:
Overall Color: Black
Batteries:
Number Included: 1
Voltage: 19.2
Battery Charger:
Voltage: 19.2 volts
Cord:
Cord Option: Cordless
Included with Item:
Bits: Yes, 1 double ended bit
Charger: Yes

Eletric Kobalt Cement Mixer (dfw) $150

2009-12-30T15:12:00-06:00

This mixer is half off in stores.
I Payed 308 With Taxes At lowes.
Kobalt Cement Mixer
Model 043206
Hp1/2
Serial 1308

Call Me At 214-881-3574

porter-cable chipper/cleaner (edmond, ok) $100

2009-12-30T15:02:26-06:00

for sale porter-cable industrial chipper/cleaner. used for taking rust off of metal. appears to be in good condition asking $ 100.00 obo. contact me at 405-341-4226 or email me at stan@frontrowaudio.com. cash only

cooper tools "buckeye" grinder (edmond, ok) $100

2009-12-30T15:01:37-06:00

for sale air driven buckeye grinder, looks in new condition from cooper tools. asking 100.00 cashobo. call me at 405-341-4226 or email me at stan@frontrowaudio.com

Power Washer Motor and Pump, Honda GC160, 5 HP (Frisco, TX 75034) $65

2009-12-30T14:57:14-06:00

I have a Power Washer Motor and Pump. This engine looks basically new. This is an Excell XR2625, 2.5 GPM Pressure washer but it does not have the hoses or the wand. Motor looks like it is new and runs perfect. I have not tested the pump because I do not have the hoses. You are welcome to bring hoses and try it out. If you need a motor this would be a great way to save some money. From the condition I would say the pump is fine.

Price $65.00

Please call Matt @ 214-529-3536

Item is located in Frisco, TX 75034

Wright Impact sockets 3/4 inch (Red Oak, TX) $150

2009-12-30T14:43:31-06:00

I am pretty sure they are 3/4 inch they might be half inch. The largest on is 1 1/2 inch. They are the Wright name brand heavy duty Impact sockets. I looked them up and these sockets range from 20.99 to 36.99. At an average price of 25.00 each this is 200.oo worth of NEW unused at all impact sockets. My neighbor who is a mechanic alreayd offered me 130 for the whole set so dont bother going less. I told him I would leave this post up for a few days and if I could get the money then he could have them. They have been sitting in my garage about 6 years. I started driving instead of diesel mech so I never used them. IF they are half inch then I will take 125.oo

ALUMMINUM EXTENSION LADDER (KAUFMAN) $65

2009-12-30T14:31:04-06:00

THIS LADDER IS A OLDER LADDER , BUT IS STILL IN GOOD CONDITION!! ALL IS WRONG WITH IT , IT HAS A LITTLE PAINT ON IT OTHER THAN THAT ITS GREAT!!ITS ABOUT 24 FT. EXTENNDED!! NO PICS!!

Original "Job Box" Heavy Duty $250

2009-12-30T14:25:16-06:00

On-Site Tool Box

Lesco 80lb Fertilizer Spreader (Corinth) $200

2009-12-30T14:24:37-06:00

Lesco 80lb Fertilizer Spreader. Excellent condition. Very little use. It is a little to big for my small business so I would like something smaller.

Werner Extension Ladder-MT13 (Southlake) $50

2009-12-30T14:20:43-06:00

Hi, selling our Werner Extension Ladder (like a gorilla ladder), used condition, definitely a work ladder. (Paint and stuff on it) It's A 13' MT13. Any questions please let me know!

This ladder is the ultimate in versatility. Use as a stepladder, twin stepladder, extension ladder and stairwell ladder. Add a plank and it becomes a sturdy scaffold. You can tackle numerous jobs both inside and outside with this ladder. Clean paint, wallpaper, gutter clean are just a few of the many ways you can use this ladder. When not in use, it folds up conveniently for storage.

* 300 lbs load capacity
* Soft push touch knobs for ease of use
* Great for stairways
* Stores and transports easily
* MFG Brand Name : Werner Co.
* MFG Model # : MT-13
* MFG Part # : MT-13

Work Benches - Welding Tables (Garland) $150

2009-12-30T14:19:05-06:00

I have (9) Heavy Duty Work Tables/ Welding Tables

Dimensions: 60'' X 36'' X 36''

Heavy Duty Steel Construction with solid welds. This table will hold a lot of weight. Good for mounting vises on.

Also, I will have (5) 60'' X 22'' X 36''. These are also very heavy duty tables. These are great for assembly or for smaller areas.

Call 972-977-8429 or email me if you have any questions.

Snap-on Tool Cart (Frisco, TX 75034) $45

2009-12-30T14:09:46-06:00

Snap-on Tool Cart with two shelves. This cart has the good castors and two of them lock. Cart works as it should. Could probably use a little cleaning.

Price $45.00

Measurements: 30" Long x 16" Deep x 35" High

Please call Matt @ 214-529-3536

Item located in Frisco, TX 75034

WTB utility blower vent hose (dallas and surrounding)

2009-12-30T14:08:19-06:00

Looking to buy a 12" Utility Blower Hose. Usually 25 ft long, collapsible, ringed. Look like the one pictured. I will give 50.00 for each one you may have.

Spray Tech GPX 165 Painter (Arlington) $1200

2009-12-30T14:05:57-06:00

I am selling a SprayTech GPX165 gas powered paint sprayer. This spayer sells for over $3300 new. I am asking $1200 for mine. It is in good working condition just needs to be cleaned up a little.The GPX165 delivers the highest output in the GPX line. At 1.65 GPM, and 3300 psi this pump is made for high performance spraying. This unit includes fully pneumatic tires for easy construction site transporting, and large porting so you can spray all the high-viscosity coatings. All this at an affordable price! Shop the competitive pumps-you can't go wrong with SprayTECH! Maximum Pressure: 3300 PS� Flow output: 1.65 GPM� Maximum Tip Size: 0.042 Tip� Maximum Hose Length: 300'� Engine: 7HP Subaru

Fiesta Texas Pawn
2921 E Abram St
Arlington 76010
817-640-0753

Powertorch Plasma Cutter (Arlington) $550

2009-12-30T14:03:06-06:00

I am selling a Powertorch P20 plasma cutter. This cutter is used but in excellent condition. It sells for $979 @ homedepot. Why pay that when you can buy mine for almost half the price. The PowerTorch P20 Plasma Cutter is a professional-grade, lightweight, portable plasma cutter that can be carried anywhere with little effort. It is ideal for the farm, HVAC, auto body shop, contractor, sheet metal fabricator, and home owner for metal cutting jobs.
Recommended for cutting sheet metal to 1/8" material with a maximum capacity of 1/4"
Perfect for cutting expanded metal, stainless steel and aluminum
Operates on 115V, 20 amp for max output, 115V 15 amp for 10-15 amp output
This plasma cutter is made by Lincoln a well known name in welders and plasma cutters.
Fiesta Texas Pawn
2921 E Abram St
Arlington 76010
817-640-0753

WTB Hvlp Turbine (dallas and surrounding)

2009-12-30T13:50:13-06:00

Looking to buy HVLP turbine and other refinishing equipment. Please reply with what you may have and a price to go with it. Have cash in hand.

Graco Tex Spray RTX1000 Texture machine Slightly used. (Arlington,TX) $1000

2009-12-30T13:36:38-06:00

We are selling a slightly used Graco Tex Spray RTX 1000. It was tested and works perfect. I am needing $1000 or OBO. Please contact Jason or Pancho at (817) 640-0753..
Fiesta Texas Pawn
2921 E. Abram
Arlington,TX 76010

DeWalt DG6300B Generator (Arlington) $950

2009-12-30T13:26:54-06:00

I am selling a Dewalt DG6300B Generator. This generator is in good working condition. It has 18 volt battery start. the generator has a 389cc (13hp) OHV engine that provides worksite reliability 20% more starting watts than generators in its class Proper 120v and 240v outlets for jobsite applications Worksite tested frame with panel protection bars for increased durability Super quiet muffler reduces engine noise Idle control saves fuel and reduces noise Low oil shut-off protects engine. This generator retails for over $2000. REDUCED FOR CL CUSTOMERS ONLY. THIS GENERATOR IS NOT THIS CHEAP INSIDE THE STORE.
817-640-0753

hilti dx460 (tyler) $175

2009-12-30T13:22:39-06:00

like new used only a couple of times excellent condition with case call 512-529-9496

Ryobi 10" Table Saw with Stand (Frisco, TX 75034) $70

2009-12-30T13:16:15-06:00

I have a Ryobi 10" Table Saw with Stand for sale. This saw is very portable as it is light weight and the table is not too big. I do have the blade guard but it has not been used and is missing a bracket (never needed it). Saw is works as it should.

Price is $70.00

Please call Matt @ 214-529-3536

Item located in Frisco, TX 75034

QEP 7 inch wet tile saw (Richardson) $60

2009-12-30T13:16:10-06:00

It's in good condition, includes box and 3 blades.

Mac SPHERICAL sockets 14pc (Arlington) $250

2009-12-30T13:15:52-06:00

We are selling a set of Mac Tools Spherical sockets 14pc. These sockets retail for $356 new as a 15pc. WE HAVE ONLY 14PCS. These sockets are in excellent condition. I have 1 1/4"; 1 1/8"; 1 1/16; 1"; 15/16"; 7/8"; 13/16"; 3/4"; 11/16"; 5/8"; 9/16"; 1/2"; 7/16"; 3/8".

Fiesta Texas Pawn
2921 E Abram St
Arlington 76010
817-640-0753

4" hydrolic bender (tyler) $2400

2009-12-30T13:15:22-06:00

good condition 4' hydrolic bender has many attachments call 512-529-9496

7.5HP AIR COMPRESSOR NEW (Free Shipping) $1599

2009-12-30T13:09:12-06:00

7.5hp shop air compressor with 24.8CFM @ 100psi, 22.8CFM @ 175psi, 208v/230v single phase wired with magnetic starter, 3 cylinder cast iron pump W-configuration, H.D. oversized bearings on each end of crank, copper finned inter & after cooler with a 80gal. tank. Unit comes with a 1yr. warranty.WE are a air compressor repair shop that offers sales, service, parts & more. So if we can help you in anyway give us a call.

!!!!!!!!!!!!!!!!!!!!!!!!!!!FREE SHIPPING!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

PUMA is the manufacture for these air compressors and here is there web site so you can see who they are. ( www.pumaair.com ) After you see there web site and read a little about there company you can see that they all about makeing quality products. We also buy direct from them so we can sell our units at a lower price than many stores.

JC Master Air Products

634 N. 5th St.

Garland , Tx. 75040

Shop 972-487-1939

Larry 214-537-2879

The best way to get in contact is by calling or texting Larry Or Danny, this is much fast than email

Key Words: Magnetic Starter, Motor, Gas Power, Service Unit, Air Pump, Pressure Switch, Air Tank, Air Gauge, Air Regulator, Used Air Compressor, air compressor repair

//John Deere PE6068HF485 turbocharged diesel engine// (dallas) $22800

2009-12-30T13:04:11-06:00

toiueoiurejfjkjsdfkljsdfkljsdflkjsflkjskfljsdfklsdklfjskljfoasdfjwoiejrowejropfasfosdfoisdjflskdfjlskdjflsdjfsjdflkjsfjoosifjsdlkfjsdaoif.

treuoituroiuorjflkjsfksjdfljsdfljsdlkfjsldkjflkjflkjsdlkfjadksljalfkjslkjdsasgdflgkjfdsolgkdsfjgjfdgdosfgjodigjerpoasirjgoijldkgjflgjlasdkjglajsoij.

Delta 15 amp Chop Saw (Dallas Mockingbird) $120

2009-12-30T13:03:22-06:00

A delta 15 amp chop /mitre saw, barely used. 15 amp 10 inch cut
needs a blade

Please call 214-335-5443

Generac 7000 watt electric start generator (allen) $750

2009-12-30T12:57:36-06:00

practically brand new 7000 watt electric start generator.i only used it for one fence job.i still start it up twice a month to keep in good running order.i really have no use for it now so i just need to sell it.i live in allen tx so if you would like to come take a look at at it you are more than welcome.or you can call me at 9728056315.ask for chris..or email me at lawsonchris86@yahoo.com

Dewalt drill (White Rock) $40

2009-12-30T12:48:48-06:00

Dewalt corded drill for sale. VSR, keyless chuck, no clutch, includes manual and case. About 3 years old, well used but works great (no longer need this one but am sorry to see it go). Retails for about $60 new. Email if interested.

Black & Decker tool kit (White Rock) $45

2009-12-30T12:48:20-06:00

Black and Decker tool kit including 12V cordless drill, bits, pliers, socket set, wrenches, tape measure, level, etc (see pictures). Missing hammer (but I'm looking for it). A similar kit sells for $80-100 new. Email me if interested.

truck toolbox brandnew (garland) $200

2009-12-30T12:39:50-06:00

brand new husky tool box for the back of a pick up. i bought it a month ago but need some cash right now. call at 214-454-4822. i bought it at home depot for 265. only want 200.

Shop-Vac, 16 Gallon, 6.5 hp w/built in water pump (Frisco, TX 75034) $35

2009-12-30T12:33:30-06:00

I have a Shop-Vac, 16 Gallon, 6.5 hp w/built in water pump. This is a contractor grade vacuum that has been used around the home only. The item comes as pictured with the hose and the two hard extensions (there are no other attachments). This does have the filter inside but it could use a cleaning. You can also use a bag inside which is great for fine particles. Vacuum works perfect.

Please contact Matt @ 214-529-3536

Item is located in Frisco, TX 75034

53 ft. trailer loaded with tools $15000

2009-12-30T12:33:17-06:00

53 ft. 18 wheeler trailer included. can deliver. tools include mig welder & bottles for steel and aluminum,gas compressor, porto cooler, 20 ton shop press, 2 job boxes, engine hoist & stand, drill press, metal bender, drills, sawzalls, chop saw, cutting torch & bottles,15 gal. fuel transfer tank, nail gun, spray rig, texture gun, air hydraulic jacks, impacts, sockets, wrenches of all sizes from small to really big, and hundreds of other tools. too many to list. has a 40 ft. & 30 ft. work bench set up in trailer. $15,000 obo. call 214-881-1028

Safewaze Harness & Lanyard (Richardson) $65

2009-12-30T12:23:42-06:00

Safewaze Harness & Lanyard
$65 214-912-9766 If this ad is still here, its still available.
Click on the following link to see my other items: http://dallas.craigslist.org/search/sss?query=214.912.9766

porto cooler $500

2009-12-30T12:14:10-06:00

porto cooler with water tank and stand. cost 1,000 new. call 214-881-1028

Pallet Jack (Dallas) $250

2009-12-30T12:10:59-06:00

almost new 5500lb pallet jack. Asking $250, willing to negotiate for a reasonable price. **CALL ONLY 214 376 8963 or stop by and have look at it. B & B PAWN 3006 E Illinois ave Dallas Tx 75216. MON-SAT 8:30-6:30

DIESEL MECHANICS TOOLS (DFW)

2009-12-30T12:09:40-06:00

IF YOU ARE A HEAVY DUTY MECHANIC OR USE THESE TYPES OF TOOLS AROUND WORK HOME OR THE FARM, THEN THIS WOULD BE A GREAT FIND FOR YOU! AFTER CLOSING OUR FAMILY TRUCKING COMPANY I HAVE ALL THESE SHOP TOOLS FOR SALE. ALL ARE COMPLETE SETS AND IN THE ORIGIONAL PACKAGING.

1 - SNAP ON 600 FT. LB "TORQUEO METER" TORQUE WRENCH 3/4 DRIVE / WITH 24" HANDLE EXTENSION AND 3/4 TO 3/8 DRIVE ADAPTOR FASTASTIC LIKE NEW CONDITION

1 - SET 1" DRIVE SOCKET SET APPX 24 PCS. RANGES FROM ALMOST 3" DOWN TO 1 1/4 WITH RACHETS AND ENTENSIONS IN ORIGIONAL METAL BOX PERFECT CONDITION

1 - 9 PC SET OPEN / BOX END WRENCHES 2" TO 1 1/8"

1 - BELL HOUSING DIAL INDICATOR COMPLETE IN ORIGIONAL PACKAGING PERFECT CONDITION

1 - BUSHING DRIVER SET COMPLETE IN ORIGIONAL PACKAGING

1 - SNAP ON GEAR BEARING PULLING TOOL SET WITH TWO DIFFERENT SIZES OF ATTACHMENTS COMPLETE SET IN ORIGIONAL PACKAGING

2 - 1/2 HEAVY DUTY COMMERCIAL DEWALT DRILLS

1 - LARGE DEWALT COMMERCIAL GRINDER

1 - SNAP ON COOLING SYSTEM TESTER COMPLETE IN ORIGIONAL PACKAGING LIKE NEW

I WILL SELL ALL TOGETHER OR INDIVIDUAL. CASH ONLY.

ALL THESE TOOLS WERE MY OWN PERSONAL TOOLS AND WERE MAINTAINED AND KEPT CLEAN AND IN THE ORIGIONAL MANUFACTORS CONTAINERS AND ARE COMPLETE SETS WITH NO PARTS OR PIECES MISSING. CONTACT MIKE @ 469.644.3118 OR EMAIL edcmlong@att.net IF INTERESTED. THANKS FOR LOOKING!

gas compressor $1000

2009-12-30T12:05:07-06:00

13 h.p. engine. 120 gal. tank. electric start call 214-881-1028

graco spray texture (oak cliff) $600

2009-12-30T12:03:40-06:00

brand new in box. never used.

Graco Texspray RTX 900 Sprayer

Fast, high-quality interior finish
The all new RTX 900 is the perfect choice for the small contractor who's looking to spray high-quality texture finishes with a simple-to-use, self-contained machine.

Features and Benefits

�New RotoFlex II Texture Pump
�Features an innovative braided sling that provides extra support to the RotoFlex pump tube.
�Delivers smooth material flow for uniform coverage and a consistent spray pattern.
�New Higher-Production Performance Points�
�Material flow increased by more than 20% - finish jobs faster.
�Material pressure boosted by more than 10% - handle thicker mud mixes.
�New Higher-Capacity On-Board Air Compressor�
�Produces 4.0 cfm at 40 psi.
�20% greater air output projects material farther.
�Complete air-consuming splatter and orange peel finishes faster.
�New Larger Capacity Hopper�
�Holds 8 gallons of material for more time spraying between refills.
�Ultra-low entry height of 32 inches makes filling the hopper easier.
�New Single-Motor Design - One motor operates the pump and air compressor, making the sprayer smaller and 15 lbs (7 kg) lighter.
Comes complete with:

�3/4 in x 25 ft (19 mm x 7.5 m) Material Hose
�3/8 in x 25 ft (9.5 mm x 7.5 m) Air Hose
�Air Spray Trigger Gun
�Four Nozzles (4 mm, 6 mm, 8 mm, 12 mm)
�3/4 gallon Touch-Up Hopper
Specifications:

�Max Working Pressure: .60 psi (4.2 bar)
�Max Delivery Rating: .9 gpm (3.4 Lpm)
�Motor Size: 1.7 hp
�Weight: 60 lbs (29.4 kg)
Key Applications:

�Residential Applications
�Light Commercial Interiors
�Key Materials
�Simulated acoustic
�Drywall mud
Downloads:

�Product Brochure
�Manuals

Graco Texspray RTX 900 Sprayer

this is the online store price. All-Wall Price: $799.00
you save $200.00

New Craftsman Cordless Drill 19.2V (Dallas) $55

2009-12-30T11:58:19-06:00

miller XR control mig welder $2500

2009-12-30T11:50:16-06:00

this welder can weld anything. it will plug into a trailblazer 302 for mobile use. call 214-881-1028

Over 30 Hand and Power Tools for Sale!! (Dallas)

2009-12-30T11:39:56-06:00

We have contractors with over 30 hand and power tools for sale...very very good prices!!

For pricing and pix:
http://dallas.diggerslist.com/FS-Tools_and_Hardware-CatFSt00

Rolling Tool Cart - Heavy Duty (Carrollton) $80

2009-12-30T11:35:38-06:00

Super Heavy-Duty tool cart made by Rubbermaid Commercial

Measurements: 20" x 33.5" x 33"Tall

ONLY $80.
Check Out All My Other Stuff On Craigslist !
Here is a link that will pull them up: http://dallas.craigslist.org/search/sss?query=214-404-7293

Clarke 130 Welder (reduced) (grand prairie) $275

2009-12-30T11:30:54-06:00

Only used 3 times, like new condition. CLARKE 130 Mig Wire Welder Gas/No gas reduced from $315 or best offer

multiquip 2" trash pump $500

2009-12-30T11:25:51-06:00

used multiquip 2"trash pump qu-2th....211 gpm...5.5 hp honda gx160....$500.00 obo....call scott 817.829.4511

☺☺☺Trimmer☺☺☺ (South Dallas) $10

2009-12-30T11:15:43-06:00

Orange Black&Decker electric Trimmer. $10.00
Works good.

HILTI SHOTGUN (DX 460) (DFW) $190

2009-12-30T11:04:28-06:00

USED HILTI SHOTGUN IN GOOD CONDITIONS (DX 460) FOR $ 190.00
CASH ONLY
214)986-4021 DELFINO

MAKITA 18V IMPACT DRILL (DFW ) $145

2009-12-30T10:57:07-06:00

USED IN GOOD CONDITIONS , DEWALT 18V IMPACT DRILL FOR $145.00
CHARGER , 2 BATTERIES , DRILL (USED ) IN GOOD CONDITIONS
214)986-4021 DELFINO

(DC 927) DEWALT 18V CORDLESS HAMMERDRILL (DFW ) $210

2009-12-30T10:53:30-06:00

BRAND NEW IN CASE DEWALT 18V (DC 927) CORDLESS HAMMMERDRILL FOR 210.00

CASH ONLY / PRICE FIRM
214)986-4021 DELFINO

HILTI SHOTGUN (DX 460) USED (DFW ) $210

2009-12-30T10:49:33-06:00

USED IN EXCELLENT CONDITIONS , HILTI SHOTGUN ( DX 460) 210.00
PRICE FIRM
214)986-4021

MAKITA TABLE SAW (DFW ) $390

2009-12-30T10:46:47-06:00

BLADE SIZE; 10
120 V
SEMI-NEW ( USED 2 TIMES )
RICE FIRM
THANK YOU 214)986-4021 DELFINO

MAXUS PORTABLE SANDBLASTER $200

2009-12-30T10:46:40-06:00

USED MAXUS PORTABLE SANDBLASTER MXS21003....125 LB....65-125 PSI.....$200.00 OBO....CALL SCOTT 817.829.4511

Cat Forklift (Justin,TX) $2300

2009-12-30T10:44:52-06:00

Cat, TC-40 Forklift, LPG, 10' height reach, Solid Tires.
E-Pictures on request.
Asking $2300
940-648-2638

DEWALT 18V IMPACT DRILL (DFW ) $230

2009-12-30T10:43:21-06:00

BRAND NEW DEWALT 18V IMPACT DRILL FOR 230.00 CASH PRICE FIRM PLEASE
COMES WITH CHARGER , 2 LITHIUM ION BATTERIES, DRILL ALL IN CASE .
214)986-4021 DELFINO

HILTI SHOTGUN GX120 (GAS) (DFW ) $410

2009-12-30T10:38:24-06:00

SEMI- NEW HARDLY USED , HILTI SHOTGUN USES GAS (GX 120) FOR 410.00 , PRICE FIRM ......
HILTI'S LATEST TOOLS
214)986-4021 DELFINO

NEW ~~~~MAKITA 18V IMPACT DRILL (DFW) $210

2009-12-30T10:34:41-06:00

SELLING BRAND NEW MAKITA 18V IMPACT DRILL SET ;
2 BATTERIES , CHARGER , DRILL IN CASE
CASH ONLY ,
214)986-4021

yamaha electric start generator $1200

2009-12-30T10:26:12-06:00

yamaha yg6600de electric start generator 6600watt....good battery...starts right up......$1200 obo....call scott at 817.829.4511

POWERMATIC DRILL PRESS $400

2009-12-30T10:24:01-06:00

POWERMATIC DRILL PRESS MODEL...D176...VARITABLE SPEED....1800-4600 RPM....PULLED FROM WORKING SHOP.....CALL 817.829.4511

2 TON ENGINE MOTOR HOIST LIFT $150

2009-12-30T10:19:37-06:00

FOR SALE BIG RED BRAND 2 TON FOLDABLE ENGINE HOIST USED 1 TIME LOOKS BRAND NEW....LOCATED IN KELLER
CALL 817.829.4511

delta unisaw table saw 10' 3hp $700

2009-12-30T10:18:37-06:00

FOR SALE.....10" DELTA UNISAW......MODEL 34-802....3HP MOTOR.....TILT.......230V.......UNI-FENCE......THIS SAW IS IN GOOD SHAPE AND READY TO GO TO WORK.....SAW IS LOCATED IN KELLER TX.....CALL 817 829 4511

Slab Countertop Seaming System (Dallas Metroplex) $750

2009-12-30T10:03:54-06:00

Do you want CHIP FREE - SUPER TIGHT SEAMS?

IF you are doing ANY KIND OF SLAB COUNTERTOP PRODUCT Like:
Natural Stone, Granite, Marble, Slate, Limestone, Onyx, Travertine, etc -
or Quartz Products like Zodiaq, Caesarstone, Silestone, etc or the new
"GREEN" Products (recycled materials) like Envirostone, Icestone, Vetrazzo
and Paperstone - THIS IS THE SYSTEM YOU NEED TO USE!!!!

DESIGNED TO DO INSIDE MITERED CORNER SEAMS - (aka - Euro Miter,
French Miter, Lock Notch, Butterfly, Dog Leg, etc)

The ACCU_SEAM VGi-1 will help you to to CHIP FREE - PERFECTLY TIGHT SEAMS
with NO GLUE LINES VISIBLE!!! Yes - IT"S THAT TIGHT!!!

Systems are BRAND NEW - NEVER BEEN USED!!!!

Email to the address above to get links to watch the VIDEO ON YOU TUBE,
the Accu-Seam Web Site, and info on hoe to purchase using PAY PAL

Thanks for looking and Happy Fabricating!!!!!