craigslist | tools in south DFW

Ingersoll-Rand air compressor, trailer mounted, with jack hammer (Cedar Hill) $4950

2009-12-31T09:27:39-06:00

Great running Ingersoll-Rand 100cfm air compressor, powered by four cylinder Ford gas engine; clock shows 1002 hours on it; just had a good amount of maintenance done on the engine and it starts and runs smoothly. $4,950 OBO; I don't need it any more and will consider trade for a truck or car or other items of value. Call Maurice at (972) 814-7391.

kwiklift (austin area) $800

2009-12-31T08:11:10-06:00

powdercoated "maroon" in color the pic is of my other one that is currently in use. I have two and selling the extra one.

located in North Austin area

CUSTOM BUILT A FRAME HOIST (MANSFIELD) $1000

2009-12-30T19:30:06-06:00

I have a a frame hoist with electric winch and 10,000 lbs newmatic castor wheels , $1,000 cash firm , call 817-939-4135

2 NEW DEWALT SCREW GUNS AND AIR SANDERS (MANSFIELD) $40

2009-12-30T19:25:20-06:00

2 New dewalt screw guns , 1000 rpm , $40 each , also 2 - air sanders and 2 - da sanders with pads for both , $100 for all 4 sanders and pads , call 817-939-4135

1000 WATT SHOP LIGHTS (MANSFIELD) $300

2009-12-30T19:21:48-06:00

I have 2 - 1000 watt lights with 2 extra bulbs , they will hook up to all phases of electricity , $300 for all , call 817-939-4135

2 STEEL DUMPSTERS (BURLESON) $650

2009-12-30T19:06:52-06:00

I have 2 steel dumpsters $650 each or $1200 for both , call 817-939-4135

NEW FORD 2' BACKHOE BUCKET (BURLESON) $400

2009-12-30T18:30:11-06:00

I have a new ford backhoe bucket it fits a ford backhoe 2' wide , $400 cash ,call 817-939-4135

DryRod Welding oven (Whitney, TX) $100

2009-12-30T17:40:30-06:00

Phoenix DryRod Welding oven for sale. $300 obo. Need to sell, moving.

Dale 254-266-2020

keywords: welding oven, welder, welding tools

Heavy Duty Coax Cable Crimper (Duncanville) $15

2009-12-30T16:32:01-06:00

For RG-59/RG-6 cable. Thanks

RIGID AIR COMPRESSOR (Cleburne) $175

2009-12-30T14:11:09-06:00

I have a Rigid portable air compressor for sale. It is the stackable tank type like Home Depot sells. Works great and in good condition. My wife bought me another one for Christmas and I can't use it.
$175.00 OBO ( no ridiculous low-baller need apply) CASH ONLY or will trade for a name brand handgun bigger than a 22cal. Thanks, Tony

Storage tank with pump (Ennis) $350

2009-12-30T09:59:18-06:00

this is a large storage tank with pump

call Michael 469-358-5947

Oil drain bucket (Ennis) $250

2009-12-30T09:55:02-06:00

This is an oil drain bucket

call Michael 469-358-5947

Rotary Lift (Ennis) $1500

2009-12-30T09:52:00-06:00

This is a working rotary lift

Call Michael 469-358-5947

Tennant Parking Lot Sweeper (Ennis) $2500

2009-12-30T09:50:20-06:00

This is a working Tenneant parking lot sweeper

call Michael 469-358-5947

Kohler air compressor generator (Ennis) $150

2009-12-30T09:47:38-06:00

This is a Kohler Air Compressor Generator

call Michael 469-358-5947

18ft. Car Hauler Trailer (Waxahachie) $2400

2009-12-30T07:55:41-06:00

Brand New Never been pulled 18ft. car hauler......2 3500lb axles with brakes on both axles......easy lube hubs(buddy bearings).....5inch C-channel framing......5inch C-channel wrap around tongue.....2inch bulldog hitch...7000lb. dropleg jack....2 7/8 pipe front bump rail....all steel diamond plate flooring....raised flooring....diamond plate tear drop fenders.....4 recessed D-rings in the flooring.....stake pockets every where for strapping down......recessed lighting all the way around trailer....5ft. ramps with the pockets under trailer for storage.....Brand New 205/75/15 Tires......7round electric plug.....safety break away kit....the only thing that can wear out on this trailer are the tires and they are brand new......a very very nice trailer ready to work today........$2400 plus TT&L.....972-935-1272.........THANKS

U bolts - Bulk - Many Sizes - Thousands (Galveston County) $1

2009-12-30T00:09:49-06:00

I have thousands of U Bolts!!! Galvanize and Zinc... 3/8", 7/16", and 1/2". Square ends and round ends. Many sizes from 1" - 5" wide and up to 8" long. Call me with what you need for prices. Cheap!!!! Will give good deal on bulk orders...... Call 409-256-5368

Delta utility sharpener (dfw) $75

2009-12-29T23:49:46-06:00

I have a Delta Utility sharpener in excellent shape. call 469-658-1667

heat guns (dfw) $30

2009-12-29T23:46:30-06:00

i have 2 commercial heat guns in excellent shape. 30 each obo. call 469-658-1667

milwaukee heavy duty band saw like new (dfw) $175

2009-12-29T23:41:49-06:00

i have a milwaukee heavy duty band saw with case. used once, excellent shape, call 469-658-1667 if interested

Lincoln Precision Tig 275 Digital Welder (Galveston County) $2900

2009-12-29T23:09:06-06:00

This is a Lincoln 275 Precision Tig welding machine. It is on the runner cart so it can be rolled around easily. Cart holds 2 argon cylinders or bottles. It is water or air cooled. Currently has a 350amp water cooled tig gun on it and a thump amperage control. Coolant lines currently connect to water supply. It is ac/dc and has digital readouts. It welds stainless, aluminum, steel, tig, stick, etc. excellent. Comes with 1 tig gun, 1 stinger with lead, thumb remote, and 1 ground clamp. No bottles are included as they are rentals. This is a very nice welder. These are over $4000.00 new. I recently bought a welder with more features and will no longer use this one. You are welcome to come buy and weld with it. Thanks, David. (409) 256-5368

6ft Shear 14 gauge PEXTO !!!! (Galveston County) $2300

2009-12-29T22:39:45-06:00

I have a 6 ft PEXTO Mechanical shear. The capacity is 14 gauge. It is 3 PHASE. I do NOT need it anymore. Works good. Have forklift to load. First $2300.00 CASH!!! or TRADE.... Trucks, welding equipment, ETC.....???????? Send pics of trade to dhk5368@yahoo.com Can send pics if needed. Call David at 409-256-5368

Press Brake - Chicago -- !!! (Galveston County) $4500

2009-12-29T22:34:05-06:00

This is a 30 ton mechanical CHICAGO press brake in excellent shape. Has a back stop and some dies. It is 3 phase. It is 5 ft. I just moved my shop to a smaller location and I do not need it anymore. Can load with forklift. First $4,500.00 CASH gets it. Call David at 409-256-5368

Vintage 1986 Homelite 150 Auto Chainsaw (Near Cleburne) $42

2009-12-29T17:35:37-06:00

this is a very dirty but restorable, homelite 150 chainsaw. it has a good bar and chain, spark, good compression and looks all original.

MANUFACTURED BY:
HOMELITE CORPORATION
PORT CHESTER, NEW YORK, U.S.A.
SERIES OR ASSEMBLY NUMBER:

YEAR INTRODUCED:
1986
YEAR DISCONTINUED:
1986
ENGINE DISPLACEMENT:
2.64 cu. in. (43.3 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.5625 in. (39.7 mm)
PISTON STROKE:
1.375 in. (34.9 mm)
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Piston ported
MANUFACTURER ADVERTISED H.P.:
not advertised
WEIGHT :
9 lbs. 4 oz. (4.2 kg) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Rigid
CHAIN BRAKE:
none
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Die cast magnesium
MAGNETO TYPE:
Breaker point system on early models, solid state on later models. A conversion kit was available to change from breaker point to sold state.
CARBURETOR:
Tillotson HK-3 series or
Walbro HDC
MAJOR REPAIR KIT:
RK-36HK
K10-HDC
MINOR REPAIR KIT:
DG-1HK
D10-HDC
AIR FILTER SYSTEM:
Cellulose fiber element
STARTER TYPE:
Homelite automatic rewind
OIL PUMP:
Automatic
OPERATING RPM:
7,500, no load 10,500 to 11,000
IGNITION TIMING:
28 degrees before TDC
BREAKER POINT SETTING:
0.015 in. (0.38 mm)
FLYWHEEL/COIL AIR GAP:
use special 0.0125in thick shim
SPARK PLUG TYPE:
Champion RDJ-7J
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
15.8 oz. (450 ml)
FUEL OIL RATIO:
32:1 with Homelite oil
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Homelite chain saw mix oil
CHAIN PITCH:
3/8 in.
CHAIN TYPE:
Oregon 72
BAR MOUNT PATTERN:
01 link
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40cm)
LONGEST GUIDE BAR SUPPLIED:

Vintage Homelite 240 Chainsaw (Near Cleburne) $55

2009-12-29T17:00:09-06:00

this is a nice, working, homelite 240 chainsaw. it starts right up and runs very well. it was my go-to, old reliable saw. it always starts when my newer, "fancy" saws won't. it has a really nice 16" oregon bar. i have a video of me starting this saw and it running if you want to see how easily it starts. you can buy a new Poulan EPA choked POS at the store that will frustrate you to the point of insanity (been there done that) or you can buy this saw and get the job done.

HOMELITE CORPORATION
PORT CHESTER, NEW YORK, U.S.A.
SERIES OR ASSEMBLY NUMBER:
10625
YEAR INTRODUCED:
1986
YEAR DISCONTINUED:

ENGINE DISPLACEMENT:
2.4 cu. in. (39.3 cc)
NUMBER OF CYLINDERS:
1
CYLINDER BORE:
1.563 in. (40 mm)
PISTON STROKE:
1.250 in. (32 mm)
CYLINDER TYPE:
Aluminum with chrome plated bore
INTAKE METHOD:
Reed valve
MANUFACTURER ADVERTISED H.P.:
2.16 SAE @ 8,000 RPM
WEIGHT :
9 lbs. 12 oz. (4.4 kg.) powerhead only
OPERATOR CONFIGURATION:
One Man operation
HANDLEBAR SYSTEM:
Anti-vibration
CHAIN BRAKE:
Optional
CLUTCH:
Centrifugal
DRIVE TYPE:
Direct
CONSTRUCTION:
Plastic
MAGNETO TYPE:
Electronic
CARBURETOR:
Zama C1S-H4
MAJOR REPAIR KIT:

MINOR REPAIR KIT:

AIR FILTER SYSTEM:
Foam
STARTER TYPE:
Homelite automatic rewind
OIL PUMP:
Automatic
OPERATING RPM:
9,500 to 11,000 no load
IGNITION TIMING:
fixed
BREAKER POINT SETTING:
none
FLYWHEEL/COIL AIR GAP:
0.015 in. (0.38 mm)
SPARK PLUG TYPE:
Champion DJ7Y
SPARK PLUG GAP:
0.025 in. (0.63 mm)
CRANKSHAFT MAIN BEARINGS:
Caged needle roller
FUEL TANK CAPACITY:
15.2 oz. (450 ml)
FUEL OIL RATIO:
32:1 with Homelite oil
RECOMMENDED FUEL OCTANE:
Regular
MIX OIL SPECIFICATION:
Homelite chain saw mix oil
CHAIN PITCH:
3/8 in. low profile
CHAIN TYPE:
Homelite
BAR MOUNT PATTERN:
12 link
SHORTEST GUIDE BAR SUPPLIED:
16 in. (40 cm)
LONGEST GUIDE BAR SUPPLIED:
18 in. (45 cm)
COLOUR SCHEME:
Homelite Red
PAINT CODES:

ILLUSTRATED PARTS LIST:

SERVICE MANUAL:

Miller wire welder millermatic 200 sale/trade for 2 smaller welders (Joshua) $850

2009-12-29T15:09:52-06:00

I've got a miller wire welder millermatic 200 that I want to sale or trade for 2 smaller welders- wire, stick,or even for a gas welding machine. Watcha got??? Call text or e mail Kevin 817-437-0450

Lincoln weld-pak 100 (Burleson Tx) $100

2009-12-29T12:33:05-06:00

Lincoln 120 volt flux core wire welder (no gas) wire lead not working.

TMC Forklift (Ennis) $4200

2009-12-29T12:19:36-06:00

TMC Forklift.3750lbs. lift,propane,good shape

Tile saw (Burleson TX) $100

2009-12-29T12:15:28-06:00

Ryobi tile saw with stand used once

12' CHAIN - 5/8 DIA LINKS - 8" HOOK (BARRY / CORSICANA) $40

2009-12-29T12:04:18-06:00

12' CHAIN - 5/8 DIAMETER CHAIN LINKS - 8" HOOK - GOOD FOR TOWING - PULLING TRACTORS OUT OF MUD - YES YOU WILL GET STUCK AND THEN WISH YOU HAD A HEAVY DUTY CHAIN !!!!!!!! CALL 903 - 519 - 2135

12" Delta Radial Arm Saw (Ennis) $1250

2009-12-29T11:11:19-06:00

Delta 12" Radial Arm Saw with steel stand. Like New - See deltaportercable.com and under saws see item #33891 for photo and specifications.

Spot welder (Mansfield ) $100

2009-12-28T20:06:53-06:00

Have spot welder no longer use need gone

18' Fiberglass Extension Ladder (Lake Whitney, Texas) $125

2009-12-28T12:15:25-06:00

18' Davidson OSHA Approved Extension ladder barely used. I bought it and the job ended as I used it the one time. I paid nearly $300.00 for it.

MAC Ratcheting Box End Wrench Set (Palmer 75152) $25

2009-12-28T09:12:48-06:00

This is a standard (SAE) set of reversible ratcheting MAC box end wrenches that I have had for about 5 years. They did not get much use by me so I am selling cheap. They work well, are easily cleanable and are easy to lubricate.

Chris 214.417.4905

Fork Lift Drum Clamp Attachment (Palmer) $150

2009-12-28T07:37:15-06:00

Wesco two arm drum clamp attachment for a forklift. Never Used. Cost more than $250.00 Will sell for $150. Located 25 miles south of Dallas on I-45. I work in Plano and may be able to meet on my way home. If interested please call 214-687-2141.

Chopped Lincoln 200D (Corsicana) $10000

2009-12-27T23:07:27-06:00

Chopped Lincoln SA200 D Kubota diesel excellent condition, 10,000 FIRM... Chopping a RED D ARC 300 right now, and also doing a diesel conversion after that I will be needing something else to work on call 214-497-9464 or 903-673-1624.

6' Plastic Storage Shelves (S. Grand Prairie) $20

2009-12-27T16:53:18-06:00

Plastic heavy duty storage shelves 6' tall. Sells for $40+ at Home Depot. First $20.

Ridgid 18v Cordless Drill/Driver, 3 Batteries, Charger, Bag (Arlington, TX) $150

2009-12-27T15:34:55-06:00

Ridgid 18V Cordless Drill/Driver (MFG Model #/Part#: R86007)
� Integrated Chuck and Gearbox � allows for a more compact design
� Forward/Reverse Rocker Switch
� Torque : 460 In lbs
� 2-Speed Transmission: 0-450/0-1,650 RPM
� 24-position clutch
� �� Single-Sleeve Chuck � holds bits tight and secure
� Chuck Type : Keyless
� Chuck Capacity : ��
� Overmold Handle � for secure grip and maximum user comfort
� Amperage : 1.5 A
� Assembled Depth (In Inches) : 19.37 in
� Assembled Height (In Inches) : 8.86 in
� Assembled Width (In Inches) : 6.30 in
� Assembled Weight (In LBS) : 10.82 lb
� Battery Amp/Hour : 1.5 aH
� Battery Type : Lithium-Ion
� Color/Finish : Orange/Black

Included with the Drill:
� 2 Compact Lithium-Ion Batteries - R840084 (one is only 2 months old)
� 1 High-Capacity Lithium-Ion Battery � R84008 (only 2 months old)
� 20/30-Minute Ridgid Lithium-Ion/NiCad 9.6 Volt thru 18.0 Volt Battery Charger - R840091
 Fits Ridgid battery models R84008/R840084, 130252001, 130252002, 130252003, 130252004, 130254001, 130252007, 130254002, 130254003,
130254007 and 130254008
 Will charge a Compact Battery in 20 minutes and a Max HC battery in 30 minutes
� Heavy Duty Contractor Bag

This drill is less than a year old and is in very good condition. The HC battery and one of the compact batteries are less than 2 months old. The LED light has been removed in order to extend the battery life.

Call Mark at (972) 748-4046 if you're interested.

Chopped Lincoln SA200 D For Sale (Corsicana)

2009-12-27T11:31:15-06:00

Chopped SA 200D for Sale 10000 firm. Chopping a RED D ARC 300 right now and also doing a kubota diesel conversion after that nothing call me I need to work on something 214-497-9464, or 903-673-1624.

Tire Machine,Bumper Jack,Snap on air compressor (Mansfield) $1000

2009-12-26T23:58:03-06:00

I have a tire machine for 1000. I have a Bumper Jack for 800, and i have a Big red snap on air compressor or 1000. All well below used prices. Please email to buy terrylonghorns@yahoo.com ** dont be affraid to make offer and trades welcome send pics of what you have

Knack Workbox/tool storage (Red Oak) $75

2009-12-26T12:55:58-06:00

48"x 30"x 34" 4 wheels

hot water washer (waxahachie tx) $850

2009-12-26T08:43:45-06:00

THIS IS A GOOD UNIT IT HAS A ONAN MOTOR IT HAS A REEL FOR HOSE ( IT DOSE NOT COME WITH THE 4 WHEEL DOLLY IT IS SITING ON ) FOR MORE INFO CALL RUSSELL @ 9729353242 THANKS

Craftsman 8.5 hp chipper / shredder (Midlothian) $380

2009-12-26T08:11:32-06:00

Model # 247775880. This model comes with 4 wheels for easy transport. Shredder chute folds down for leaf raking. Craftsman chipper/shredder is in excellent condition. Comes with owners manual. Very little usage. Chips up to 3" limbs. Call 972-948-5271 to make arrangements to see.

Sliding DOOR Secuity LOCK Cord SAFETY Lockout PHONE TOOL /Plugs from (Duncanville, Cedar Hill, Dallas, 75249) $1

2009-12-24T21:21:41-06:00

PLEASE NOTE: No need to email for availability.
Items are promptly removed from ad listing when no longer available.

The following items are AVAILABLE, Photos Left to Right:

photo 1) BASE CORD CONNECTORS use to repair base PHONE cord (modular 4 conductor (2-line) $1

photo 1) RCA MODULAR HANDSET PLUGS for replacing existing modular PHONE plugs
.......... or adding plugs to Phone extension cords. $1

photo 2) "Panduit" CORD LOCKOUT for 110V PLU (Great for Child Safety) $3
................... Purchase 4 for $9

photo 3) Security Hardware Patio Sliding Glass Door LOCK w/KEYS $5

photo 4) RCA STRIPPING / CRIMPING TOOL for replacing existing modular PHONE plugs or
.......... adding plugs to PHONE extension cords $4

Cash only, Pick up only, ...................Purchase ALL for $14

See other items available at this location: http://dallas.craigslist.org/search/sss/sdf?query=cw+75249&minAsk=min&maxAsk=max

Where Dallas, Duncanville, and Cedar Hill annex. Nearby Hwys: 1382, I20 & Hwy 67.
BEFORE emailing inquiries, PLEASE LOOK UP ZIP CODE: Dallas, TX 75249

Individual, cw, misc, :)

FLUKE Multimeters 87III,77,2-179's (granbury 817-964-5351) $150

2009-12-24T11:02:34-06:00

I have 4 Fluke electrician multi purpose meters. These testers are all in great shape. The 87III is new with the plastic still on the screen I need $200 for it. The meters are slightly used by the FAA ,calibrated and serviced with strict standards.The department was discontinued.The 179 and the 2 77's are priced at $150 each. You can buy all four with two Fluke carring cases for $500.00 817-964-5351

5 HP Tecumseh Engine (Greenville) $150

2009-12-23T21:34:23-06:00

Like new. Started maybe 4 times 903-450-3231 Over $300 new at Northern.

Wheel barrow air compressor (S ft worth) $200

2009-12-23T16:17:06-06:00

8/1/7/8/9/6/2/7/5/0

Mac Tools ABS Scanner (Corsicana) $225

2009-12-23T14:19:21-06:00

1 Mac Tools ABS Code Scanner ET9450 use 3 times w/case and all software and cables $225.00 o.b.o.

Full size Long bed Ladder Rack (Granbury) $100

2009-12-22T11:51:55-06:00

From Long bed F-150 Should fit Chevy and Dodge

817-894-8068

Hitachi C10FL Table Saw Like New! (mansfield) $475

2009-12-21T18:26:39-06:00

This table saw is in excellent shape! It sells for $599 new at lowes. I got it thinking I was going to start making sub boxes and needed to make straight cuts. I just never ended up doing it, so I have cut a total of maybe 15 boards!!! So no wear and tear on it. It cuts real nice and straight. The fence is great because it locks down and stays sturdy and square. It has wheeles that it can roll on and then they you can lower it easily on the ground so it's not on wheels. Call or text me 817-480-8565 Trent. Here is a link to all the specs just copy and paste into web browser:

http://www.lowes.com/lowes/lkn?action=productDetail&productId=159372-46578-C10FL&lpage=none&cm_mmc=search_yssp-_-Feeds09-_-December1109-_-Hitachi%2015-Amp%2010"%20Table%20Saw%20C10FL

Miller Syncrowave 180SD (Midlothian) $1800

2009-12-21T16:34:25-06:00

MILLER SYNCROWAVE 180SD
Stock# 907055
Serial # LG031005
For sale is a Miller Syncrowave 180SD. The unit is in excellent condition with very low use. I can deliver for a fee.
The Syncrowave 180 SD is a complete single-phase, AC/DC, TIG/Stick Squarewave power source package. All you need is filler material; a bottle of shielding gas and some Stick electrodes and you're ready to start welding. With over 20 years in Squarewave technology, the Syncrowave 180 SD packs a maximum 180 amps, or 150 amps at 40% duty cycle. The Syncrowave 180 SD is a full-featured machine that brings you capabilities which were previously available only with heavy-duty industrial TIG equipment. Features 180 amps maximum output 150 amps at 40% duty cycle Squarewave output Single-range output 3-position polarity switch. Line voltage compensation. Built-in gas solenoid. Quick connect leads Built-in HF arc starter and stabilizer. Comes complete with: Power source with primary cord, 150 amp Tig Torch with 12 1/2 ft (3.8 m) cord, 12 ft (3.7 m) work cable and clamp, Electrode holder and quick-connect, RFCS-14 Foot Control with 20 ft (6 m) cord, Gas regulator and gas hose. If you have any questions email or call 817-296-2705. Thanks Karl

Tempo Progressive Electronic 200EP (Midltohian) $75

2009-12-21T14:41:33-06:00

This Tempo 200EP is one a many electrican tools I have for sale. All tools are for pick up and cash only.
This is an electricans tool. Call (214)708-4375 if interested.

Tempo Progressive electronic 200EP inductive amplifier with the 77 HP tracer.

Wire tracker GET-4110T transmitter (Midlothian) $40

2009-12-21T14:39:10-06:00

Wire tracker GET-4110T Transmitter. Multi Purpose wire tracer. For cash and pick up only. If interested call (214)708-4375.

Ideal circuit breaker finder Model 61-532 (Midlothian) $25

2009-12-21T14:37:38-06:00

Ideal Circuit breaker finder. Transmitter Model #61-532. Also comes with analog reciever Model # 61-52. For cash and pick up only.

AW sperry WS-6A meter w/ transmitter (Midlothian) $35

2009-12-21T14:35:52-06:00

Aw Sperry outlet circuit tester. Model WS-6A. For cash and pick up only.

MILLER BOBCAT 255 (ALVARADO) $1800

2009-12-21T14:18:57-06:00

USED MILLER BOBCAT 225 $1800.00
WITH RUNNING GEAR

CALL JAMES @ 817-689-7511

New 48" Aluminum Pipe Wrench-Light Weight (Cleburne) $200

2009-12-21T12:58:12-06:00

I have a new 48" Aluminum Pipe Wrench that has never been used. Bought it to use on my job that i had in the oil feild, but was laid off before I ever used it. Bought it for $330.00 but only asking $200.00.
*******VERY LIGHT WEIGHT*****Call me any time at 817-487-1082 and ask for robert.

Solid Wood Tool Workbench New Christmas Gift for Dad? Will take Paypal (Glen Rose Granbury Area) $150

2009-12-21T11:56:08-06:00

Solid Wood (Birch wood on working surfaces) work bench. Stained & sealed. Solid & extra sturdy! Beautiful piece. Two shelves & cubby for screws & nails. Great to organized tools, just add a piece of peg board behind the work bench & it looks great! The peg board in the picture is not included, but can be purchased at Lowes for $13.50. First person to email gets the bench. Thank you & Merry Christmas.

53 x 24 inches
34 inches tall

Accu-turn 5602 Tire Machine 24"Tire Changer, Rim Clamp (Midlothian Tx) $3200

2009-12-21T06:01:07-06:00

Very Nice used Accu-turn 5602 Tire Changer with the highly successful MH320 pneumatic helper Arm w 3 helpers !
(( NESCO - Larry 469-867-5582 Leave Message Please! )) if no answer! $3200. Firm!!!

The MH320 eases the fitting of "difficult" tires and, with other accessories, enables the mounting/demounting of "run-flat" tyres

* Ideal aid for tyre changing, especially with wide tyres having stiff sidewalls, and indispensable for run-flat tyre system such as PAX, CSR, RFT, eufori@,EMT, DSST, SSR and ZeroP (some may require additional accessories)
* Integrated pneumatic bead hold-down device, turning 360� with the wheel
* Pneumatically operated roller, directly on the mounting head
This MH 320 is also on machines that Snap-On makes like John Bean & Hofmann.

Max Wheel Size is 24" ( Max From Outside Clamping 24") Clamps open to 26", Note a (26" wheel is 28"s) ( Max Inside Clamping = 26"inches? ) Not a 26" Wheel = is 28"
Min Wheel 10"-12" 4 Wheeler / Lawn mower style maybe? / Motorcycle Adapters can be ordered! ( i do my motorcycles on them with No Problem! )
3 Way Adjustable Rim Clamp sliders!

Has Been Completely gone over, & Torn Down by myself for maintenance & Ready to go to work!
This is a Tilt Tower Style Machine! This is Accu-turn`s Top of the line Heavy Duty Rim Clamp Machine they made. This was built in 3-2003!
All DFW Carmax`s have these machines & many other shops & dealerships & im the one that fixes them!
i have put about $1500.00+ in Parts & Labor , going through this machine completely for 2-3+ days at my shop! Everything works good! ( had it Sold mths ago for 26" machine= it ISNT)
New Switch$301. for the Motor& Labor Total=$427. & New Sw/Motor Harness / New Demount/Mount Head $400. / Rebuilt Bead Loosener Cylinder $250.+/
has New updated Metal Dump Bead Blast Valve $225.00 located on air tank at rear!
All Mufflers drilled out of Pedal Valves to Operate for better Flow! Mufflers are known to stop up on most tire changers depending what style they are after a year or so!
Everything has been cleaned & lubed & serviced !
( It still Needs 1 helper assist Robo Arm wheel, But Most Shops Don`t even use that part of the machine!) it will be Extra if wanted! (#2023778 $109.+tax Disc Bead Breaker) Lifts Tire up!
There is Also optional : Light alloy rim protector=Protection Slide Jaw Set of 4 #4027908 from Accu-turn at ($74.88 NewUpdated10-09 )Was $140.00! Not Included in Price of machine!
another Optional Tool is a Rim Depressor that attaches to the Robo Arm Bead Depressor to Assist to push down the Rim to clamp from the outside of wheel #20024205 $38.40
(i just updated This Page 12-24-09 2am) with more info

5602 Specs ---> i Also have a Brochure i can send to you Email to View w Specs, When the machine was New! i have Operator Manual Specs also!
i can Also Send an Operators Manual & Parts breakdown After the Sell !
1.2 SPECIFICATIONS
Electric-pneumatic tire changer for car, light commercial
vehicle and motorcycle tires designed for one piece rims.
Weight...........................................lbs 607 (276 Kg) - ( 710- 770 lbs with Robo Arm Assy per manual w 2 diff Weights )
Air pressure required.........psi 110-170 (8-12 bar)
Bead breaker tool force.........lbs 3300 (kN 15) --> Brochure says 5600 lbs, i dont think thats right!
Electric specifications..............115V, 1 ph, 60 Hz.
Motor...............................................Hp 1 (0.75 kW)
Max. torque...........................740 ft lbs (Nm 1000)
Max. wheel diameter.....................39" (1000 mm)
Max. wheel width.................................15" (381 mm)
Max. rim width..................................13" (330 mm)
Rim diameter outside locking..................10"-24"
Rim diameter inside locking.....................12"-24"
Motorcycle rim locking
with adaptors................................................8"-23"
Specifications: from Brochure!
Tire Diameter 40� 1016 cm
Rim/Tire Assembly Width 15� 375 cm
Rim Width 15� 375 cm
Turntable/Outside Clamping 10-25� 254-635 mm
Turntable/Inside Clamping 12-28� 305-711 mm
Weight 710 lbs. 322 kg
Overall Dimensions:Width 43� 1092 mm
Depth 52� 1321 mm
Height 75� 1905 mm
Model 5602 - High Performance Tire Changing Machine
Our best pneumatic tilt tower High Performance Tire Changer. Designed for high volume shops doing run flat, low profile and high speed rated tires daily. New expanded 25" outside clamping ability is standard. The automatic tilt tower design features pneumatic locks & mount/demount head retractors. The extra wide base eliminates turntable interference while bead breaking. The 5602 & 5602 HP offers a two position bead breaker for wider performance tires. Includes convenient storage bins with built-in gauge, hose and bleeder valve.

� Tilt Tower with Pneumatic locks & mount/demount head retractor
� Pneumatic mounting helper provides:
o Hands-free Easy mounting of the most difficult high performance low profile tires
o Integrated top roller - easily rolls top bead down, bead depressor holds the bead in the drop center, preventing accidental reseating
o No scratching - Tire changer never touches rims, removing any danger of accidental damage
o Simple operation - 15 minutes average training time
� Extra wide base eliminates turntable interference while bead breaking, as well as creating a convenient pedal location. Two position bead breaker.
� Non-opposing 3-position adjustable jaws. Outside clamps up to 25" with integrated plastic protection to eliminate wheel damage.
� Inflation jets built into the clamps ensure maximum pressure where you need it, when you need it.

im a Bosch & Accu-Turn Service repair tech for the DFW Dallas-FtW Texas Area = WichataFalls to Waco to Denison Tx (( Company Name is NESCO - Larry ))
Most any Auto & Tire shop/dealer that has our NESCO sticker on their machines Knows me! Been doing this since 1997! in automotive since 1976!
i repair most ALL Brands & Models of Tire/Wheel & Brake Service & Alignment Equipment at Professional shops!
I Don`t have an exact price of what this machine was sold for, but have been told it was a $7000.-$8000.? When New! im Not Sure! i took in on trade!
Note:
Be Warned, **Dont even call me up & offer a lower price, because its NOT Going to happen! This is a Professional Tire Changer, not a cheapy style discounted machine!
i Will Deliver the machine up to 30 Miles, if its a Sold Deal & paid in Cash on delivery! No Check ( I Have Lots of Pics, When i had it All torn down going through it ) if you Need More Pics!
i Will Give a ( 30+ day Warranty only in the Dallas-FtWorth Area Only! ) My Service calls are $95.00 locally in DFW = up to 1 hr of Labor! & $65.hr after that ! + Mileage after 50Miles!
NESCO - Larry 469-867-5582 Leave Message Please! (( 4 Pics=Top Right Picture is just a Good Reference from a Brochure , Not the Actual Machine i have! ))
Top Plastic Dust cover is missing on top of machine=top left pic at top of tower on the left! Top Tilt Cyl Cover-Plastic # 20020312 $ 34.80 Cover Tower
another Plastic cover also = Air Tube Cover 20015370 $ 16.70 Cover Plastic, covers up 2 small air lines on Vert Shaft Slide in / out!

Just Know if anything bad happens to it, i will help out the best i can up to 90 days if possible; Locally DFW area Only!!
I Cannot Verify what the real problem is if you do have a problem, if Not bought Locally! So Be Aware of that Also!
i Always want to take care of my customers & anybody who`s done business with me, knows that! Thanks NESCO - Larry 469-867-5582 Leave Message Please!
( i Also have Another machine Almost just like it= Kwikway Sicom yr2000 $2200.00 ) will post soon

Stihl TS 400 cut off saw (Red Oak, TX) $475

2009-12-20T19:02:18-06:00

Stihl TS 400 cut off saw
-completely rebuilt
-new cylinder and piston, crank bearings, seals ,new gaskets, all air filters, 14 inch blade quard.
-2 available both rebuilt. $475.00 each
-Ready for work!!!!!

Roy 972.489.7065

Honda Generator (Red Oak, TX) $850

2009-12-20T14:20:45-06:00

Honda EB6500X 6,500 watt generator. 13hp Honda engine. Runs good. Great for an RV. $850 obo
Phillip
214-802-8802

CUSTOM LADDER RACK (dfw) $100

2009-12-20T08:46:34-06:00

I've been making custom ladder racks for many years. I make them all custom any size any shape for your truck because every truck has different dimensions, you can also add extra hooks, welded on ratchet straps, a sliding bar for the middle, or what ever else you might have in mind. all made with 14ga steel it safely rated at 1000lbs. so just give me a call and I'll have it made asap. I can also INSTALL and PAINT. prices are $100 for the small side by side ladder rack which are made REMOVABLE if needed, $210 for the big over the cab ladder rack, which the back bar is removable. $15 to install. more pics are @ craigswelding.webs.com

My number is (940)-391-1749 thanks, Craig.

Montgomery Ward Welder (Midlothian) $100

2009-12-19T15:24:34-06:00

If you are interested, I can text you a picture. Stick welder. Runs on 220 volts and handles a max output of 225 amps. Works great!!!

60 gal Air Compressor (Ovilla) $400

2009-12-19T14:55:30-06:00

Sears Craftsman 6 HP 60 gallon Twin Cylinder/Oil Free Air Compressor Runs great Contact 469-438-4983

Got Any HeliCoil Kits You Don't Need? (Duncanville)

2009-12-19T10:30:41-06:00

Standard or metric, full or partial kits. Thanks

Craftsman Tool Box Full With Assorted Tools, Wrenches, Sockets. (Palmer) $150

2009-12-19T10:02:49-06:00

Craftsman Tool Box Full With Assorted Tools, Wrenches, Sockets. 150.00 OBO 214-399-6649

Snap-On classic 96 Roll Cab Toolbox (Midlothian) $3500

2009-12-19T02:06:35-06:00

I have for sale a Snap on classic 96 roll Cab Tool box. Part number KRA2418PBO. Retails new for $5500 from Snap-On. Has a few nicks ans scratches from normal use but no abuse or damaged drawers.

Asking $3500, If you want the tools too it will be $5500. I prefer cash but would consider trades or partial trade for a Full Size Bronco or other comparable 4x4. Email me through craigslist with offers

Width, inches (mm) 73 3/8 (1,864)
Depth, inches (mm) 24 (609.6)
Height, inches (mm) 39 1/4 (997)

Can see specs and price at snap-on website here:
http://images.google.com/imgres?imgurl=http://buy1.snapon.com/catalog/OBJECTS/52200/52110.JPG&imgrefurl=http://buy1.snapon.com/catalog/item.asp%3Fstore%3Dsnapon-store%26item_ID%3D77156%26group_ID%3D20013&usg=__s3kjNKZUeE5k2zL3vDYLjUsmCzo=&h=146&w=240&sz=259&hl=en&start=32&um=1&tbnid=ToVkuTd7h9GblM:&tbnh=67&tbnw=110&prev=/images%3Fq%3Dsnap%2Bon%2Bclassic%2B96%26ndsp%3D21%26hl%3Den%26rlz%3D1R2PCTA_en%26sa%3DN%26start%3D21%26um%3D1

ESAB MULTIMASTER 260 welder (HILLSBORO) $2200

2009-12-19T01:51:26-06:00

i have a esab 260 multimaster 260 mig tig stick all in one, like new. bought it for 2800 brand new less than a year ago. i built my project truck with it and now im done and it just sits in the corner of my dads shop. i can count on one hand how many times ive used it, its a great welder but i just done have any use for it. not even half way thru the first roll of wire. 2200 obo

Husqvarna demo /concrete saw (crowley) $400

2009-12-19T01:47:31-06:00

12 inch blade runs great call jimmy 817-919-2506

1.5hp 3ph 60gal air compressor (Cedar Hill) $200

2009-12-18T12:54:31-06:00

Air compressor needs a head gasket, that is it. The electric motor and tank are worth more than what I'm asking. 1.5 hp, 1730 rpm, 230/460 volt, 3 phase power. I have a forklift, just bring your truck and cash.

8 ft fiberglass ladder 300 lbs capacity (corsicana ) $100

2009-12-18T12:20:15-06:00

I have a 8 foot fiberglass ladder 300 pound capacity its in good condition I used it once to paint my daughter room so this one does have paint on it. otherwise looks like new. I have two ladders for sale. a 28 ft and this one. please call me at 903-493-2307 thank u kimberly.
oh.... I will try to get a pic posted as soon as I n. im postiong this ad from my cell phone

2 New Strap Rollers (Cedar Hill) $20

2009-12-18T12:12:52-06:00

Selling for 20 for both or $15/ea
New Strap Rollers
No Trucker should be without one.

Winch Strap With Flat Hook 4" x 27' yellow (Cedar Hill) $80

2009-12-18T12:12:36-06:00

One New& 6 Used
Winch Strap With Flat Hook
4" x 27' yellow
LoadGard tm Yellow Standard Treated Webbing
�h Flat Hook (FH) Style
�h 4" Wide
�h 27 ft. Long
�h 15,000 lbs. Minimum Break Strength
�h 5,000 lbs Working Load Limit

MIB Safety Tape - Silver/Red 2� x 150� (Cedar Hill) $100

2009-12-18T12:12:21-06:00

High Intensity Reflective Safety Tape - Silver/Red 2� x 150�
Self Adhesive and Easy to Apply
D.O.T. Approved Silver and Red Tape
Reflective Safety Tape.
Highly visible this vinyl self-adhesive tape is water-resistant.
It can be used to mark designated areas for safety purposes or to mark items for easy visibility (mailbox, fire extinguisher, stairway, commercial vehicles).
1 tape per card. 2" x 24" Sells for $5.
No. TAPE-2: Red and silver stripe

4 Porta Wenches (Cedar Hill) $80

2009-12-18T12:11:59-06:00

Porta Winch fits all stake pockets, using standard straps and a winch bar.
Turns stake pockets into secure attachment points for loads, using standard straps and a winch bar.
Enables truckers to tie down loads quicker and more securely than with bolt-on or clamp-on winches.
�h Outward offset designed for standard flatbed applications
�h Design eliminates drilling and tools
�h Accepts winch straps up to 4in. wide with standard flat hooks or chain anchors
�h Silver powder-coat finish for corrosion resistance
�h Working load limit of 5500 lbs./2500 kg.

Brand New Armada Brake Chamber (Cedar Hill) $20

2009-12-18T12:11:26-06:00

Armada Brake Chamber
Type-30 Service Chamber
PART # BNAR508637

This is an aftermarket replacement chamber.
Stud Spacing 4.75" - 121 mm
Stud Type: 5/8 x 11 UNC Grade 5
Stud Length: 1.50" - 38 mm
Push Rod Thread: 5/8� x 6�

28 ft fiberglass extention ladder (corsicana) $225

2009-12-18T12:07:31-06:00

I have a 28 ft fiberglass ladder its in good shap. these ladders run around $400 and higher. this one has a 300 capacity. its blue. Im setting this post through my phone. I will try to get pictures asap. if intrested call me 903-493-2307. I will not be checking emails.. call only.
thank you kimberly

Hannay Hose Reel, 2 Hoses up to 1"! NEW! Holds 350' Hose! List $885! (Blum, TX) $425

2009-12-18T10:09:02-06:00

Hannay Reel 7032-33-34 - RT

Lists at $885.00, then you pay the freight, which ain't cheap, bro! You can get it here for half price or better!

Hannay Reels 7000 series

Series 7000 -- 7032-33-34

Lots of uses: fire hoses, ranch and farm hoses, industrial hoses, and per specs, just about anything you want.

Specifications
Flange Diameter 31.75 inch

Core Diameter
10.50 inch

Hose O.D.
1.28 to 1.56 inch

Hose I.D.
0.7500 to 1.00 inch

Length
200 to 350 ft

Material
Steel

Rewind
Manual; Hand Crank

Features
Allows item on reel to be used while still on reel. Hose or electrical cable.

Assembly Description
Mounting Frame

Notes
3/4" or 1/2" inner diameter, for oxygen/acetylene/hydraulics, aux. rewind

Condition: On original shipping pallet. Never used. Fitting caps never removed. Hand Crank handle still in bubble wrap. still bolted to skid. Appears showroom clean and shiny. See pix.

Delivery and shipping: Per specs, shipping weight is approximately 187 lbs (see pix). Skid dimensions are 45" wide, 34"Deep, and total height is 36". You can pick it up here, we can ship it to you, or my husband can deliver it to you for $1.00 per mile on the one way distance, $50.00 minimum. So if you're a hundred miles from us, shipping would be a hundred bucks. Please ask before buying as to shipping to be sure we can make it happen for you to your happy satisfaction. Have fun and squirt that hose! We will be happy to ship via any shipper you choose... as long as they'll come and pick it up here. We will give you the info to make the arrangements. Simple.

Makita Cordless Drill! Look! (Arlington) $35

2009-12-18T09:21:17-06:00

Just in time for Christmas! I was given this Makita drill as a door prize and have duplicates! This one has to go! It has been sitting in my garage unused! Please give it a good home! It is a 7.2 Volt with two batteries that I just charged up and it is ready to go! Merry Christmas! 210-858-4609!

Campbell Hausfeld "Medallion"Airless Paint Sprayer (Desoto, TX) $275

2009-12-17T21:53:19-06:00

I bought this 3/4hp (Model# AL241000LX) spray rig off of Craigslist for $200. I thought I was getting a good deal because the guy stated he had recently rebuilt it. It had an old gun on it so I invested in a new gun and hose from Home Depot($150). I was painting my new house and 3 days into the job the unit started acting up. Out of frustration and lack of time I went and got a new spray rig. Turns out the guy I bought it from didn't rebuild it at all. I bring it to a repair shop and $165 later the unit undergoes a total rebuild. It's got new inlet and outlet valves, new diaphragm assembly, new hydraulic oil and gasket and new filter screen. So, with $515 invested in the thing I'm just trying to sell it for what it's worth. My loss is your gain. It comes with a 90 day warranty from the shop that rebuilt it. Call Don at (972)951-8346.

Top & Bottom Tool Boxes $1

2009-12-17T17:31:57-06:00

I have a Blue Point KRB series from Snap On Tools. They are 4 sliding drawer Top and a 7 sliding drawer bottom set. Bought from Snap On. It really looks nice and all the drawers slide perfectly! It even has the thin padding that came with in the drawers.Comes with the keys to lock it as well..... Asking $950.00 O.B.O might trade for dirtbike,streetbike,car or truck let me know what you have?

Milwaukee 12 Volt Drill/Driver Kit (De Soto, TX) $60

2009-12-17T15:17:29-06:00

What a deal on a like new tool! This Milwaukee tool kit contains a 1/4" quick-load hex driver, a 30 minute charger and two 12 Volt Lithium-Ion batteries in a handy, carry case. If you appreciate quality tools, you already know about the Milwaukee brand. The driver is much more powerful and higher quality than the brand-x, cheap tools which you may have tried in the past. Lithium batteries charge rapidly and hold a charge much longer than NiCads. The driver has a torque control which helps to prevent breaking screws when used as a screw driver. Have yourself a Merry Christmas and do not miss this deal. This powerful and compact cordless tool will quickly become your favorite just as it was mine. Email me for a quick response. Cash only and local pick-up please.

Automatic Level (Waxahachie, Tx.) $80

2009-12-16T19:24:20-06:00

CST? Berger 24 Power Automatic Level

Comes with plum bob and string

Setting tools

Nylon strap

Originial case from factory

Call 903-513-0328 ( No E-Mails Please )

Level Manual (Waxahachie, Tx.) $25

2009-12-16T19:14:14-06:00

Berger Instruments

Model 135

Made in U. S. A. Boston Mass.

comes with original case and manual

Call 903-513-0328 ( NO E-MAILS PLEASE )

bostich compressor and 5 guns $300

2009-12-16T11:41:15-06:00

hardly used compressor brad nailer-stapler-palm gun-finish nailer-f28ww framming gun$.300.IF YOUR REPLY LOOKS LIKE SPAMMER NO REPLY SO SORRY BUT THATS WHAT I KEEP GETTING FOR EMAIL..if your interested leave name and phone in your reply.IM only asking this because of spam.you can see pics thats what im selling.IF you question price go to lowes or home depot.$220.00 +tax just for framming gun.you could easily approach $500 for new.everything in the pics.THE FRAMMING GUN HAS NOT SHOT A WHOLE BOX OF NAILS YET.ANYONE WHO SHOWS UP CAN TEST EACH ITEM EVERYTHING WORKS.THANK YOU

~Large Horizontal Drill - Must See This...~ (Lake Whitney, TX) $995

2009-12-16T11:23:15-06:00

~CLICK TO VIEW MORE PICS - Large Horizontal Drill~

CLICK HERE TO VIEW MORE ITEMS FOR SALE!!!

air compressor and all tools $300

2009-12-15T15:27:35-06:00

5 guns and bostitch compressor hardly used.300.

Custom Ladder Racks $100

2009-12-15T14:25:46-06:00

ratchet straps (burleson) $15

2009-12-15T13:44:10-06:00

7 available at $15 each

Call Mike
817-454-7123

goodyear atv/motorcycle hydraulic lift (burleson) $100

2009-12-15T13:21:20-06:00

Never used still in box
Goodyear 1500lb capacity motorcycle/ATV hydraulic lift. Lifting range 5"-17"

Call Mike
817-454-7123

durotek tool box (burleson) $100

2009-12-15T12:19:03-06:00

durotek stainless steel toolboxnever used-still in box
14.5"x 26"x 12"

3 drawer/ 4 compartment
stainless steel
steel bearing drawer slides
heavy duty handles
secure locks with round key
reinforced drawers

Call Mike for details
817-454-7123

Bostitch Contractor Compressor CWC200ST (burleson) $250

2009-12-15T12:17:16-06:00

NEW Bostitch Contractor Compressor CWC200ST
3 HP, 4 gallon
Sales on Amazon.com for $282.82 used - $350 new before shipping/tax
Bostitch Twin Hot Dog Compressor with 3-horsepower, 15-amp induction motor
5.1-cfm @ 40-psi and 4.0-cfm @ 90-psi; dual air outlets
Cast-iron pump cylinder for extreme durability
Includes panel with regulator gauges and hose port
Backed by 1-year warranty

Call Mike
817-454-7123

HOBART STICKMATE LX WELDER (MIDLOTHIAN) $300

2009-12-14T21:59:19-06:00

WELDER HAS MINOR SCRATCHES
AC/DC CAPABILITIES
HAVE ACTUAL PICS, BUT I AM INCLUDING THE SPECS FROM NORTHERN TOOL FOR THE EXACT SAME WELDER.

http://www.northerntool.com/webapp/wcs/stores/servlet/product_6970_384175_384175

Honda WA15 gasoline powered water pump (Midlothian) $150

2009-12-14T18:55:30-06:00

Honda G100 2.5 hp OHV engine on 1.5 inch water pump. 53 gallons per minute. Small and light weight. Starts easily. Call 972-948-5271.

100 GAL FUEL TANK & ELECTRIC PUMP (MANSFIELD) $250

2009-12-14T18:14:00-06:00

I HAVE FOR SALE A 100 GALLON FUEL TANK W/ELECTRIC PUMP FOR 250.00.

EMAIL FOR PICS OR IF YOU HAVE ANY QUESTIONS PLEASE EMAIL AND LEAVE YOUR # AND I WILL CALL BACK.

THANKS.

Scaffolding like New (Metroplex) $400

2009-12-14T17:24:15-06:00

Like New Scaffolding for sale. 5 sets of 5'x7' w/braces, 2' wide metal boards (2), wheels(4) and pins. Maybe used 5 times
214.392.4383

Miller Syncrowave 250DX (Midlothian) $4000

2009-12-14T16:34:38-06:00

MILLER SYNCROWAVE 250DX TIG / STICK WELDER 907194
Stock# 907194-03-1
Serial # LE325705
Miller Syncrowave 250DX Tigrunner Tig/Stick welder. The unit is in excellent condition with very low use. It includes tig torch, wheel kit, integrated liquid cooler, regulator, and foot control. No gas bottles or stick lead included. The serial # LE325705 and stock # 907194-03-1. I can deliver for a fee. If you have any questions please ask before bidding. Thanks.

bostitch everything airgun compressor ect (cleburne) $300

2009-12-14T11:50:29-06:00

BOSTITCH COMPRESSOR 6GAL,WITH FINISH,BRAD,STAPLER,AND PALM GUN ALL THAT WOULD BE OVER 240.00 AT HD BUT IM THOWING IN F28WW FRAMING GUN 220.00 AT HOME D.THAT WOULD BE 460 +37TAX=497.00+ I WILL SELL ALL FOR 300.00 CASH.HURRY AND CALL BEFORE I CHANGE MY MIND.AND PULL THIS.YES IM FIRM ON PRICE.AND NO I WILL NOT DELIVER I WILL HOWEVER THROW IN STAPLES BRADS,AND WHAT I HAVE LEFT OVER FOR 3 IN NAILS.BUT ONLY IF YOUR HERE BY 5:00 PM .817-556-9692

Craftsman QuietGlide Tool Box With Tools (Waxahachie, Texas) $375

2009-12-14T11:38:28-06:00

This is a Craftsman 13 Drawer 26 in. Quiet Gldie Combo tool box, bought it new 2 years ago its in excellent condition. When I bought this box I paid close to $800.00 with tax. I checked on Sears' website its on sale untill 12/18/09 and its going for $375.00, just the boxes. I have a full mixed matched set of metric and standard sockets as well as wrenches, screwdrivers and other misc. tools. I also have a work light and small flashlight. Look at the picture too much to list. Contact Mike at 214.853.1757. I need to sell this fast. I aslo have a 7 foot pool table as wells as a stainless grill with propane tank.

Snap On Rolling Tool Box - Great Deal (Mansfield) $1000

2009-12-14T10:53:36-06:00

I have a very nice Snap on tool box. Added an aluminum Trailer Whiz Pneumatic rolling cart. This is a nice tool box. Just in time for Christmas.

I have got to make room in my garage and have 3 tool box's First $1000 takes it. I invested over $4k in the whole thing.

Call me at 817-821-6371 or email richardbuxman@launchapparelco.com.

Thanks,

Richard