craigslist | tools in dallas / fort worth

Tool sale (Flower Mound)

2009-12-31T04:11:32-06:00

I am selling all my tools make me an offer or I will wait for spring and have a garage sale. Engine stand, Engine hoist, Pipe threader, parts washer(small), 'B' tank torch, drills, chop saw, pressure washer, sink machine, right angle drill, band saw, hand tools, and more. If I didn't list it, tell me what you're looking for. Feel free to offer a trade.

Ingersoll Rand Impact (Keller) $75

2009-12-31T02:07:52-06:00

I am selling an IR impact. It is a1/2 inch drive model number 231c call 817-372-2746 Randy

1987 LINCOLN SA-200 (Springtown,TX) $2500

2009-12-31T01:36:44-06:00

This welding machine came from the factory with a distrbutor, it has been replaced with electronic ignition, that means no points to replace and no mag, no matter how much moisture is in the air or how cold it is it will start with ease. Last year I had the all the seals replaced and the motor was rebuilt and new rings. I used this machine for bout 5 years on mainline pipeline jobs, the amps and volts are set to hang with the best on mainline, I bought a 200-D last year and this machine after being rebuilt has been setting hate to part with it but would rather it be used for some good. Has all the sheet metal and both doors, it does not leak or use oil, give me shout back as soon as possible won't last long, have pics to send if interested.

Mag-lite Flashlights and Parts (Denton) $50

2009-12-31T00:39:30-06:00

I am selling the following Mag-lite flashlights and accessories as a package:

Three 4-D cell flashlights (black with Krypton bulbs)
Two 2-D cell flashlights (blue and black with Krypton bulbs)
Two spare Krypton bulbs
Eight spare AA/AAA bulbs
Three spare standard bulbs
Two spare rubber switch covers
Seventeen spare stainless steel bulb spacers
Four spare O-rings
Three spare lenses
One pair of wall-mount clamps

All items are in good to excellent condition with very little use.

Lathe Sears Copy Crafter (Arlington) $100

2009-12-31T00:31:26-06:00

Lathe in working condition.

Chop saw (Arlington) $50

2009-12-31T00:29:07-06:00

Black and Decker working chop saw. Will throw in an extra blade.

Radial Saw (Arlington)

2009-12-31T00:19:36-06:00

Sears Electronic Radial Saw in working condition with extras. Clearing out my warehouse and everything needs to go. Email me for a time to see the saw.

Engine stand (Arlington) $45

2009-12-31T00:12:04-06:00

Engine stand in great shape and good working order.

Parts Washer (Arlington) $75

2009-12-31T00:11:05-06:00

Parts washer is in good working order and has some cleaning fluid in the machine. Cleaning tray is attached to a 55 gallon drum that holds cleaning fluid.

Rockwell Band Saw (Arlington) $85

2009-12-31T00:07:58-06:00

Saw is in good working order and is mounted on a rolling frame. Saw comes with extra blades.

Tools (Arlington)

2009-12-30T23:45:05-06:00

Wrenches, sockets, screw drivers, air tools, boxes, grinders, cut off saw, spool welder, spot welder and more. All tools are used and can test before purchasing. Clearing out my warehouse and they need to go. Email me with a time to see as there is too much to list.

Meuser Engine Gap Lathe thrity-two by ninety-six (Houston, TX) $8500

2009-12-30T23:30:18-06:00

Meuser Engine Lathe
Has a Gap bed
3 1/4 Spindal Hole
Has a 32 swing by a 96 long bed
15 HP motor on a 3 Phase
inch and metric threading
Please Call For Questions (281) 948 1136

Clarke Hot Shot Spool Gun Welder (Arlington)

2009-12-30T23:26:54-06:00

The Clarke Hot Shot spool gun welder can weld up to 20 feet away from welder and features a spool gun design that allows precise wire speed control. Welder is in like new condition and has not been used very much. $275

Texfinish texture machine (Garland) $600

2009-12-30T23:24:50-06:00

Please call 214-280-8772
In perfect condition , maybe used once or twice

2 QUAL CRAFT Ultra-Jack Scaffolding 24ft Poles (FRISCO) $250

2009-12-30T23:20:42-06:00

I have 2 brand new 24ft qual craft Ultra Jack system poles for sale. They sell for over $900 new as seen at the following site:

http://www.amazon.com/dp/B0009H5GWG/ref=asc_df_B0009H5GWG981578?smid=A12QCB28TZ2MIN&tag=nextag-tools-mp01-delta-20&linkCode=asn&creative=380341&creativeASIN=B0009H5GWG

I do not have the scaffolding system. This is only for the 2 units of 24 ft poles. I am asking just $250 for 2 units.

To view our other listings click here: goldstarL

Palet jack (garland) $140

2009-12-30T23:15:27-06:00

Please call 214-280-8772

Convertible Dolly (Bedford) $250

2009-12-30T23:12:01-06:00

4 Wheel Convertible Dolly, in great condition. Easy transition from 2 wheel to 4 wheel position (see pictures)
Call 214.440.8546. Se Habla Espanol.

DEWALT 18 volt XRP Hammer Drill Like New (Keller, NRH, Watauga, Grapevine) $110

2009-12-30T23:08:56-06:00

I am selling my like NEW Dewalt Dewalt Hammer Drill. Excellent condition.
It has only been used twice. Just like NEW
The highest TORQUE 18V Drill from DEWALT. I am selling the drill ONLY **** NO battery or charger.
FREE 47 piece DEWALT bit set as a BONUS First $110 gets it.
Call or Text me at (817)909-0495
FROM DEWALT:
Features:
DEWALT built high torque motor delivers 500 in-lbs of maximum torque
Patented 3-speed transmission features a max 3rd speed at 2,000 rpm
Hammerdrill mode: 34,000 bpm drills faster holes in masonry applications
1/2" Metal ratcheting chuck with carbide jaws prevents bits from slipping
Superior ergonomics provides optimal balance, comfort and control
Voltage 18 V
Keyless Chuck
Automatic Spindle Lock
Chuck Size 1/2"
***Max. Torque 500 in-lbs***
No Load Speed 0-450/0-1,450/0-2,000 rpm
Blows/Min 0-34,000 in MAX 3rd Speed bpm
Capacity In Steel 1/2 "
Capacity In Wood 2 "
Capacity In Concrete 1/4 "

Dewalt 18V XRP RECIPROCATING Saw (NRH, Watauga, Mid- Cities) $70

2009-12-30T23:06:07-06:00

Like New Dewalt DC385 18V Sawzall with new metal cutting blade.
� 1" stroke length and 2,900 spm for fast cutting
� Keyless blade clamp allows quick blade change
Strokes/Min 0-2,900 spm
Stroke Length 1 "
Electric Brake Yes
Tool Weight 7.1 lbs
Includes:
� owners manual
� Does NOT Include (Batteries, Charger, or Case)

E Mail or Text (817)909-0495

3 phase plasma cutter (Wolfe City) $300

2009-12-30T22:31:37-06:00

I have a thermal dynamics pak 5 xl that is 460V 3 phase. It looks like it has been used very little ( original box of tips and accessories) this is a heavy duty machine. I bought it thinking I could run it on 230v 3 phase. but cant. Call cody 903 450 6749 will not ship pickup only. cash call Cody 903 450 6749

Lincoln/red-d-arc 300 d diesel welder (wolfe city) $5000

2009-12-30T22:25:14-06:00

I have a 2001 model red-d-arc 300d made by lincoln for rental industry. It has 3600 hrs and has a 26 hp kubota diesel freshly serviced and painted (exterior only) interior still looks new. I bought it in 2004 w/1600 hrs and use it occasionally on big jobs but just dont need this much machine. I have 3 miller bobcats that do the job for us on small frame buildings. This machine is in good shape and I would be interested in a partial trade for a near new miller bobcat/trailblazer/wildcat. Call with questions $5,000 obo Cody 903 450 6749

3/4 drive ingersoll impact/trade

2009-12-30T22:09:45-06:00

3/4 drive ingersollrand impact used very little paid 548.00 sell for 250.00 or trade for guns
rod 214-241-0336

ROCKWELL belt sander same as porter cable's (fort worth) $1

2009-12-30T22:07:47-06:00

I got this sander when I was in louisiana building cabinets and now I don't need it any more. Works good and will last for a long time.
I don't know how much to ask for it so please make me an offer or I can trade it for ??? let me know what u have.

(817)566-5582

From the Manufacturer
rockwell 504 3-Inch x 24-Inch 1600 SFPM Heavy-Duty Belt Sander without Bag

From the Manufacturer
Built to last, this 3-by-24-inch heavy-duty belt sander has a rugged worm gear and chain drive to provide the smoothest, most efficient transfer of power. The beefy nine amp motor is all ball and needle bearing construction for long, trouble-free tool life. A fingertip belt-tracking knob keeps the belt securely on the sander's rollers. With a belt speed of 1,600 surface feet per minute, this hefty sander can remove material quickly. Belt changes are also a breeze with the convenient quick-release belt-locking lever. This sander is industrial through and through, from its design to its performance and durability.

9 Amp motor, 1,600 SFPM
Worm-gear drive for smooth and efficient power transfer from the motor - the most efficient gearing system for belt sanders
Fingertip belt tracking knob keeps belts securely on the sander's rollers
Chain drive provides unsurpassed reliablility and operating smoothness
Quick-release belt-change lever enables belt changes in seconds
All-ball and needle bearing construction for long, trouble-free tool life

Power: 120 VAC, 25-60 HZ/120 VDC
Motor Amps: 9
Belt Speed (SFPM): 1,600
Belt Size (inches): 3 x 24
Length (Inches): 16
Net Weight: 15-1/2 Lbs.
Shipping Weight: 17 Lbs.
Dust Collection System: No

6 FT & 8 FT Werner Fiberglass A frame ladder (All DFW) $30

2009-12-30T22:03:59-06:00

I have two fiberglass A frame ladders. Red 6 FT is rated for 300 LBS $30.00 Green 8 FT is rated for 250 LBS $75.00 or Both for $100.00

I can deliver to you for a gas charge or you can come to my location for pickup. We live in Kaufman Co, near Terrell / Forney border

214 694-8852

Craftsman C3 19.2V Cordless Drill (Dallas) $55

2009-12-30T21:54:08-06:00

Condition: Brand New
Product Description
This Craftsman C3 19.2-Volt drill includes a powerful 3/8 in. Drill/Driver. The 19.2-Volt 3/8 in. drill's Variable Speed Motor (0 - 650 rpm) allows for low speeds when starting holes and high speeds for drilling. The 24 position clutch allows user to match power to the job. The 3/8 in. keyless chuck allows for easy bit changes and provides positive retention of 1/16 in. to 3/8 in. bits. The electric brake stops the chuck from turning when trigger is released. Ergonomic design handle with overmold for user comfort.
� Powerful motor driven by the 19.2-volt DieHard battery to provide the power for most drilling and driving needs.
� The keyless chuck provides quick and simple bit changes.
� Built in bubble level for vertical drilling and screw driving.
� The electric brake stops the chuck from turning when the trigger is released reducing the amount of time used in changing bits or placing a screw on the bit.
� The T-handle design with over-mold ensures balance, comfort and control.
� Built-in bit storage on the drill/driver provides an easily accessible drill bit to change as needed.
� The variable speed motor (0-650 RPMs) allows lower speeds for starting holes and higher speeds for drilling needs.
� The reversible function allows you to back out stuck bits or screws
� The 24 position clutch adjust to permit bit to slip at various torque settings. Clutch locks for drilling applications.

Specifications
Product Overview:
Item Weight: 6.1
General Warranty: 1 year
General Features:
Drill Type: Drill / driver
Chuck:
Capacity: 3/8 in.
Type: Keyless
Motor-Engine:
Motor Brake: Electric
Clutch Torque: Adjustable
Reversibility: Yes
Speed Range RPM: 0-650 rpm
Voltage: 19.2 volts
Controls, Overall:
Adj. Speed Dial: Yes
Convenience:
Built-In Bit Storage: Yes
Handles:
Main Type: T
Color:
Overall Color: Black
Batteries:
Number Included: 1
Voltage: 19.2
Battery Charger:
Voltage: 19.2 volts
Cord:
Cord Option: Cordless
Included with Item:
Bits: Yes, 1 double ended bit
Charger: Yes

taladro (1221 castle dr. garland tx.) $150

2009-12-30T21:50:52-06:00

en buenas condiciones, y con 2 baterias.

in good conditions and it comes with 2 batteries.

cell:469-432-5796

2 shop vacs (Carrollton) $10

2009-12-30T21:47:26-06:00

Two small (5 gal and 1.5 gal) shop vacs. The larger is a Shop-Vac brand and the smaller is Craftsman. Both come with hoses, although no other accessories are included. Both still work well. Both for $10. Email to come pick them up.

18V cordless drill with wrench-NEW (Mckinney) $35

2009-12-30T21:43:07-06:00

New in box. Black and Decker cordless drill 18V. Come with a wrench. Did not come with a case but I have an extra case if you would like it.
Retails for $59.

Madden 09 PSP + Extras/ Trade for Tool box (Aubrey) $1

2009-12-30T21:38:20-06:00

I have a Basically (still in original box) new Madden edition PSP with extra games and movies. It includes;
�� PSP
�� Charger
GAMES
�� Madden 09
�� NFL Street 3
MOVIES
�� Snatch
�� Hellboy
�� House of Flying Daggers
�� Behind Enemy Lines
�� Kiss of the Dragon
�� The Replacement Killers
�� Resident Evil
�� Chain reaction
�� 21

I am looking for a chest style tool box. See picture below.

Text or email 214-212-8509

Shaper (Dallas) $250

2009-12-30T21:32:40-06:00

Craftsman shaper with 1/2" shaft. With four cutters. Excellent condition--cast iron frame, steel base.

MN200 PISTORIOUS Framing miter machines (Garland) $2750

2009-12-30T21:21:47-06:00

I have two Pistorious MN200 miter machines for sale. I have completely refurbed them. they are production ready. photos are before and after. And this is not just a paint job. New belts bearings. fittings, and gone through completely. the price is each. I'm willing to negotiate based on need. Reply for a phone number to contact me. Cash or bank check only please.
I can deliver and even install within negotiation and distance.

18 Volt Milwaukee Hammer Drill Combo Kit (75090)

2009-12-30T21:14:23-06:00

I have an awesome 18 volt Milwaukee hammer drill combo kit that's used but works perfect. Both batteries hold good charge. One battery is only 2 months old. I also have a 3 bay charger that goes with the kit. Let me know what you've got to trade. I like 9,40.45. Open to other ideas. Send me pics of your trade.

Miler intelitig tig controler (Denton) $250

2009-12-30T21:12:52-06:00

This is a control head only, its the electronic portion of an industrial TIG welder, this is not a complete welder! replacement cost exceeds $2000

Will ship US wide, paypal accepted.

Ryobi Airgrip MultiTask Kit- Level (North Dallas) $15

2009-12-30T21:08:15-06:00

Brand new. Literally never been used. Ryobi Airgrip level kit. Been in bag for a year. Owners manual included. Sells at home depot for $19.97 with level only... See pics.

Edger attachment (Rowlett) $15

2009-12-30T20:59:55-06:00

I'm selling an edger attachment. It is a universal edger that will fit any weedeater that takes attachments. I only used it for one season then bought a new edger and don't need this anymore.

Call 214.263.9430 if interested.

Thanks!

Nice Shop Vac (Plano) $25

2009-12-30T20:59:06-06:00

This shop vac has been used only a couple of times - 2.5 hp/2.5 gallons - instruction booklet included - it is in like new condition. 972.618-4156

Hobart Portable Welder (Aledo) $600

2009-12-30T20:57:56-06:00

Older Hobart Gas Portable Welder . I left at a shop to have a fuel pump installed a year ago, and its still there, so I am going to sell . Its an older welder with 110 and 220 AC outlets, and I think it is a 250 , but not sure. It has a 2 cylinder Wisconsin engine (cast iron) .I turned it over about a month ago, and a valve was stuck , so I bought a headgasket for it, but never pulled the head to free the valve. Bought from a relative ,and he said the fuel pump was the only thing wrong with it when I bought it from him. $600.00 gives you some room to repair the engine , and have a nice commercial welder . I do have new leads for the unit, and will get a pic of it soon and put it on here. It looks good.

Fertilizer Spreader (West Plano) $25

2009-12-30T20:54:38-06:00

Like new condition - this is a Scott's Speedy Green 3000 fertlizer spreader.

Ryobi Gas Weed Trimmer (Plano)

2009-12-30T20:46:09-06:00

Comes with three attachments - will take $20 each or $75 for all.
Cash/pickup only

8' aluminum ladder (forney tx) $45

2009-12-30T20:45:19-06:00

8' aluminum ladder. $45 obo. don't need to take it to an apartment with 7' ceilings!

cash only

email or call 214 293-1543

DeWALT 18v XRP 4 TOOL COMBO KIT (Dallas) $360

2009-12-30T20:41:12-06:00

Brand new in case DE WALT 18V cordless XRP 4 tool Combo Kit comes with: hammer drill , Reciprocating Saw, Circular Saw,Flexible Light and 2 batteries and charger. call 214-414-4278 or e mail tono5110@yahoo.com

Trailer tilt top 6 x 12, 3500 lb rated axle, ATV, Cart, Mower (Melissa tx ) $650

2009-12-30T20:37:10-06:00

Offering 6 x 12 tilt top trailer, perfect for hauling mowers, atv, golf carts. No need to mess with heavy ramps, just pull the pin and tilt the bed up, drive on!! Will need wood floor replaced soon. Price is $650 cash.

Tom
214-673-7107

Delta 14 inch Bandsaw (Mesquite) $275

2009-12-30T20:26:37-06:00

Delta bandsaw for sale in great condition. I just dont have any use for it so call 214-240-8336 to discuss. 275 obo. See Specs below

Delta 28-275 Professional 14-Inch 3/4 Horsepower Open Stand Woodworking Band Saw, 120-Volt 1 Phase
�Nine-spoke precision-balanced wheels
�Full 16" x 16" cast-iron table tilts 45� right and 3� left for beveling operations
�Quick release tension lever
�4" integral dust port
�Cast-iron trunnions table support
�Capacity to cut stock up to 6-1/4" thick (12-1/4" with height attachment)
�Lower blade guides have sade, accurate, micrometer adjustment
�Lower guides angled to support blade to within 3/4" of table work surface -- ensures accurate cutting
�Fully-adjustable upper and lower blade guides and blade support
�Bearings maintain proper blade alignment
Delta 28-276 Band Saw Specifications
�Motor: 3/4HP
�Voltage: 120/240
�Hertz: 60
�Type: Single Phase
�Blade: Max. Width 3/4"
�Blade: Min. Width 1/8"
�Max. Length: 94"
�Min. Length: 91-1/2"
�Standard Length: 93-1/2"
�Capacity: Frame to Blade: 13-3/4"
�Under Guide and Wheel: 6-1/4"
�Speed: 3300 SFPM
�Table: Size 16" x 16"
�Groove: 3/8" x 3/4"
�Tilt: 45� R, 3� L
�Height: 42-3/4"
�Height 65-1/2"
�Width w/ Stand: 31"
�Front to Rear: 17-1/2"
�Weight: 201 lbs

quilts and table saw and cell phone (GREENVILLE TX) $100

2009-12-30T20:18:42-06:00

Quilt,cell phone sony ericsson and a table saw for sale call 903-461-8132

Lincoln MIG Accessories (lewisville, TX) $350

2009-12-30T20:17:05-06:00

Lincoln MIG Accessories comes with a NEWLincoln electric pro core 125, 140,180 MIG gun,NEW 2- 10' ground cable,NEW 2- ground clamp,NEW pare of gloves, 2- .035" flux wire, and a Smith gas regulator.

PISTOLAS PARA PINTAR AUTOS (DENTON) $259

2009-12-30T20:16:07-06:00

4 PISTOLAS MARCA SHATA DE GRAVEDAD FUNCIONANDO BIEN, 259.00 CADA UNA
TEL: 214 228 03 28

24" Black & Decker Hedge Hog Trimmer (W. Plano) $30

2009-12-30T20:12:56-06:00

Runs great - 24" Black & Decker Hedge Hog Trimmer - cash/carry.

2 NAIL GUNS (LEWISVILLE) $40

2009-12-30T20:11:29-06:00

2 Nail Guns for sale. The first gun is a Senco model sn3 that works fine and shoots 3" nails. The second is a Duofast that shoots 2" nails. It works fine but has air leak. The first $40 gets them both. Call Bob at 469-358-7172

table saw (greenville.tx) $75

2009-12-30T20:05:08-06:00

Table saw 75.00 or best offer call 903-461-8132

Craftsmans Mig Welder (arlington) $150

2009-12-30T20:01:03-06:00

The welder has been used with one spool of wire
and is in new condition,will barter ,just let me know
what ya got !!!

DRY WALL FINISHING TOOLS (FERRIS TEXAS) $1500

2009-12-30T19:51:39-06:00

7,10,12,14 INCH BOXS, HANDLES ,PUMP, ANGEL ROLLERS AND GLAZERS EVERYTHING LESS BAZOOKA

DeWALT Rock Carbide 1" (Greenville Tx) $20

2009-12-30T19:44:54-06:00

Dewalt 1 " 25,40 mm
16" long
11" spline
Brand New in Box
I have 4 of them
New: $45

Call: James 972 880 8869

Jet 98" Parallel Woodworking Clamps - Brand New (Mount Vernon (East of Dallas)) $60

2009-12-30T19:39:54-06:00

Jet 98" Parallel Woodworking Clamps - Brand New $60.00 Each

Description:

The JET Parallel Clamps have unique features not found in regular clamps. The design allows for precision and power with exact 90 degree clamping at up to 1,000 lbs. pressure which minimizes the tendency of warping and distortion of the workpiece. The movable jaw can be reversed to change the clamp into a spreader, which makes the Jet Parallel clamp a multi-purpose accessory for the woodshop.

Features:

90 Degree clamping at up to 1000 lbs. pressure
Precision-Rule� Measurement System for quick identification of opening capacity.
Slide-Glide Trigger for precise adjustments with SUMOGRIP� Handle for added comfort and increased power.
Reversible Clamping, converts clamp to a spreader
Non marring composite resin jaw faces

Specifications:

Clamp Capacity(In.): 98
Spread Capacity(in.): 105
Throat Depth(In.) 4-1/8
Clamp Pressure(lbs.): 1000

Makita Quik Drive Decking Drill (Fort Worth) $225

2009-12-30T19:30:30-06:00

If you have not seen these things before they are incredible. You have to watch this video and see was they can do.

http://www.youtube.com/watch?v=5vKyS7afMRs

Now that you see how much time and energy they can save you, don't you need this? If you are in the home improvement/construction business, either residential or commercial this will increase productivity 10 fold. This can be used for decking, tile floor underlayment, drywall, roofing, truck and trailer beds with no pre-drilling required, and probally many other things I can't think of. It will save your back and knees and reduce labor costs. If you use it daily, it will pay for itself in the first week in increased productivity.

This is a brand new drill. It still has the plastic wrap on it. The drill portion is made by Makita who has been making the highest quality tools for as long as I can remember. All attachment are made by Simpson Strong Tie. It would even make a great Christmas present for a friend or loved one. Read more from the QuikDrive website.

http://www.strongtie.com/products/quikdrive/index.html?source=qd

Don't hesitate to contact me, I work all over the metroplex, and will be happy to meet you almost anywhere.

God Bless.

CUSTOM BUILT A FRAME HOIST (MANSFIELD) $1000

2009-12-30T19:30:06-06:00

I have a a frame hoist with electric winch and 10,000 lbs newmatic castor wheels , $1,000 cash firm , call 817-939-4135

Klein Nut-Driver Set (Arlington) $25

2009-12-30T19:29:09-06:00

7-Piece Cushion-Grip Nut Driver Set with 6" shank
Hex size 3/16, 1/4, 5/16,11/32, 3/8, 7/16 and 1/2

18 volt black and decker cordless combo kit (Arlington ) $100

2009-12-30T19:28:02-06:00

This set comes with a two speed six settings clutch drill, sawz-all that never been used, a circular saw, brand new flash light, two very good batteries that hold a charge and a charger. This set is less then a year old and used maybe twice.

2 NEW DEWALT SCREW GUNS AND AIR SANDERS (MANSFIELD) $40

2009-12-30T19:25:20-06:00

2 New dewalt screw guns , 1000 rpm , $40 each , also 2 - air sanders and 2 - da sanders with pads for both , $100 for all 4 sanders and pads , call 817-939-4135

1000 WATT SHOP LIGHTS (MANSFIELD) $300

2009-12-30T19:21:48-06:00

I have 2 - 1000 watt lights with 2 extra bulbs , they will hook up to all phases of electricity , $300 for all , call 817-939-4135

18 VOLT 8 PIECE RYOBI CORDLESS COMBO KIT (Grand Prairie) $125

2009-12-30T19:18:48-06:00

This is a like new set. It comes with a 1/2" chuck 24 clutch setting 2 speed with reverse drill/drill driver, a variable speed sawz-all, a 5 1/2" size blade circular saw, a tuff sucker with filter bag vacuum, a adjustable flashlight, 2 batteries, 1 charger, the owners manual with extra circular and sawz-all blades, and it all goes in the hard bottom ryobi power tool bag.

18 volt dewalt cordless combo kit (Grand Prairie) $200

2009-12-30T19:15:32-06:00

This is a very clean set that is also in excellent condition. It has a DW995 2 speeds 1/2" chuck with 23 clutch setting drill/drill driver, a DC385 variable speeds reciprocating saw/sawz all, a DC390 with a 6 1/2" blade size circular saw, two good DC9095 batteries that hold a good charge, a DW9116 one hour charger that will charge batteries from 7.2 volt to 18 volt and will charge NiCd batteries also and a black and yellow hard bottom dewalt power tool bag.

Craftsman Wood Chisel Set (Arlington) $17

2009-12-30T19:14:41-06:00

5-piece wood chisel set by Craftsman--1/4", 1/2", 3/4", 1" and 1 1/4"

Complete set of RK tool boxes (Ft. Worth/Rendon)

2009-12-30T19:12:58-06:00

I have a complete set of contractor grade Rawson Koenig truck tool boxes in a like-new condition. They are keyed alike and will come with all 6 issued keys. They include one full length behind cab box with side openings and two bed rail boxes. These are extra nice. Please call Bryan at 817-229-9686 to discuss price and further details.

9.6 volt makita cordless drill (Grand prairie) $30

2009-12-30T19:12:56-06:00

This cordless drill/drill driver works great and is very strong. It includes the drill, three batteries that hold charge, the charger and the green plastic molded case.

louisville 40' aluminum ladder (South east Dallas.) $150

2009-12-30T19:12:08-06:00

I have a louisville 40 rung aluminum ladder for sale I don't need anymore.
I paid $400 for the ladder new. If interested call or email. Thanx,
Paul. 214.642.1446

18 volt dewalt cordless drill/drill driver (Grand Prairie) $80

2009-12-30T19:09:54-06:00

This is a DW995 6 clutch settings 2 speed reversible drill/drill driver with one very good battery and charger that all fit in it black molded case. This drill works very good and is very strong.

Shaft Protector Set (Arlington) $25

2009-12-30T19:07:25-06:00

OTC Shaft Protector Set provides wide coverage, 5/8, 5/8, 3/4, 1, 1 1/4, 1 1/2
New-Never opened

2 STEEL DUMPSTERS (BURLESON) $650

2009-12-30T19:06:52-06:00

I have 2 steel dumpsters $650 each or $1200 for both , call 817-939-4135

Woodworking Equipment and Tools (Weatherford)

2009-12-30T19:03:21-06:00

Cabinet shop selling all woodworking equipment,Items that still remain for sale are,Powermatic / Belsaw molding machine with large assortment of profile knives $2,200.00,Hamilton VR20 electric raise/lower drafting table w/Mutoh track drafting machine and scales $500.00,Hitachi M12 VC router w/manual like new $80.00,all machinery is single phase,all priced to sell.Must see!!!for location go to www.presidentialcabinetsandtrim.com All machinery is under power and ready to run.Questions??? Call 817-565-8141 The sale is open to all 8:30am to 5:30pm monday thru friday,9:00am to 4:00pm saturday and sunday.Sale will continue until all equipment is sold.Don't delay,as the best deals will go first!!!

Dewalt Cordless Drill (Royse City ) $50

2009-12-30T19:00:44-06:00

Selling 18 volt DW929 3/8" VSR Dewalt Drill, Flashlight accessory, charger, and case for 50$. Battery not included.

Received this as a wedding gift. Lightly used around the house. Battery not included.

Contact Brian at 806-584-2257. Cash only please.

Craftsman Harmonic Balancer/Steering Wheel Puller (Arlington) $10

2009-12-30T18:59:27-06:00

New--Never even opened

Craftsman Flaring Tool Set (Arlington) $25

2009-12-30T18:51:48-06:00

Contains Flaring Tool, Tubing Cutter and 6 piece Tube-Bending Set

Klein Nut Driver Set (Arlington) $21

2009-12-30T18:45:06-06:00

Cushion-Grip Nut Driver Set--7 pieces
3-inch shank
Hex Sizes 3/16, 1/4, 5/16, 11/32, 3/8, 7/16, 1/2

Craftsmen Table Saw (Corsicana) $100

2009-12-30T18:39:41-06:00

Craftsmen cast iron table saw with 2 extension, extra bales and adjustable dado, cash only please 540-840-6798

Grimmer Schmidt 175 air compressor (sanger) $2700

2009-12-30T18:36:25-06:00

Grimmer Schmidt 175 air compressor with monoblock ford gas engine, in working condition, skid mounted. asking $2700. trailer not included, if interested will sell for $400. Call David 214 284-9176

Klein Wrench Set (Arlington) $30

2009-12-30T18:34:13-06:00

7-piece wrench set, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8. The carrying bag is really dirty but the wrenches look like they have never been used.

Homelite Generator (Corsicana) $400

2009-12-30T18:33:44-06:00

Homelite 5700/7125 gas generator, 2 120 and 1 240 plugs, run one time with wheels and handles Cash only please 540-840-6798

NEW FORD 2' BACKHOE BUCKET (BURLESON) $400

2009-12-30T18:30:11-06:00

I have a new ford backhoe bucket it fits a ford backhoe 2' wide , $400 cash ,call 817-939-4135

Porter Cable 352VS Varible Speed Belt Sander 3x21 (Keller) $60

2009-12-30T18:29:30-06:00

Porter Cable 352VS Varible Speed Belt Sander 3x21 this sander is in very good working condition 682-229-3245

Power drill (Bedford, TX) $80

2009-12-30T18:24:28-06:00

Drill, practically new, comes with case and warranty.

LADDER (like new) (Bedford, TX) $80

2009-12-30T18:23:36-06:00

Ladder extension 17' & step ladder 7'

CASH ONLY

Porter Cable Tiger Saw 737 PC Sawzall Reciprocating (Keller) $60

2009-12-30T18:22:21-06:00

Porter Cable Tiger Saw 737 PC Sawzall Reciprocating 682-229-3245

ammco brake shoe grinder (santa fe, nm) $600

2009-12-30T18:20:30-06:00

used for truing brake shoes to drum great cond 600.00 obo 505-470-1248

DeWalt 18v Drills and Radio (NE Dallas) $1

2009-12-30T18:18:06-06:00

2- 1/2" Chuck Hammer Drill Driver, 2 batt's, Skillsaw, Wk. Lt. $200.00 for the lot @214/704-5270. send pic's to your phone or email

Impact napa air tool (north dallas) $125

2009-12-30T18:07:07-06:00

I have a air impact for sale its brand new in the box never used
i priced it out at napa and its worth 225 with tax so this is a very
good deal. 214-680-3888

HP TDS 48GX Data Collector (Mesquite) $850

2009-12-30T18:05:29-06:00

For sale, 1 HP TDS 48GX calculator with environment case,1 survey card , 1 memory card and 3 user guides.Data collector does need battery in memory card. Environment case has clip so no tray is needed.Call or text to 214-794-6962.

Husky 17 gallon aircompressor (Grapevine, Texas) $130

2009-12-30T18:03:57-06:00

The Husky 17 gallon aircompressor The 5.0 HP engine, 17 gallon tank and 6.5 SCFMs makes it perfect for any auto or home project
Control Panel - Easy to use and easy to read, the control panel offers complete control of air manipulation, gauge protection and no hot surfaces High output pump/motor - High Flow pump (5.6 SCFM @ 40) delivers abundant airflow for almost every household project yet is quieter than comparable competitive units Quality motor - The motor (5.0 peak HP and 1.7 running HP)

combined with the pump stands for high quality performance and starting capabilities 17 Gallon tank - Large air reservoir for extra storage during heavy duty tasks around the home
Air tool matching chart - cuts down on confusion and saves time by letting you know exactly which tool is best for which job.
On compressor tool and accessory storage - allows quick access to your air tools and accessories and keeps them easy to find all in one place
Oversized wheels - increased portability. Tilt and roll use prevents back strain from carrying around heavy equipment

MFG Model # : WL651004AJ

Specifications
Amperage : 15 A
Color / Finish : Red/Black
Cordless/Corded : Corded
Fuel Type : Electric
Horsepower : 1.7 hp
Maximum Pressure : 150 psi
Motor Type : 120 V, Oil-free, Universal
Power Requirement : 120V
Regulator : Yes
Tank Capacity : 17 gal (US)
Tank Pressure Gauge : Yes
Wheel Diameter : 8 in

SEARS AIR COMPRESSOR 20 GALLON 3HORSE POWER (FORT WORTH) $200

2009-12-30T17:56:07-06:00

OR BEST OFFER AND WILLING TO TRADE CALL(817) 317-1875

TIF 880 C/O COMBUSTABLE GAS DETECTOR (Dallas) $110

2009-12-30T17:53:09-06:00

$110 / OBO
NEVER USED!!
In box with brochures

call Steve @ 214-821-5052

18'x4' Business Sign (DALLAS) $350

2009-12-30T17:50:51-06:00

Im selling this sign because I went out of business last year and I'm trying to get rid of stuff I dont need & use.

Also I dont have where to put it and need to get rid of it ASAP.

The money would also help Asking $350 Cash Only

I also have banners available

For more information call 972-693-3087 Cindy

Hablo Espanol

Thanks for looking

sign, aluminuim, tire, shop, big, business, 18, 4, banner, espanol, carrollton, farmers branch, addison, dallas

Proto wrenches (mesquite) $350

2009-12-30T17:48:22-06:00

Proto wrenches for sale. Sizes 1 7/8, 1 13/16, 1 3/4, 1 11/16, 1 5/8. Almost brand new. $350 obo

DryRod Welding oven (Whitney, TX) $100

2009-12-30T17:40:30-06:00

Phoenix DryRod Welding oven for sale. $300 obo. Need to sell, moving.

Dale 254-266-2020

keywords: welding oven, welder, welding tools

Line-Ward Vibratory Plow (Pottsboro, Texas) $1800

2009-12-30T17:36:01-06:00

For sale vibratory plow model number L2 with tract Kohler Magnum 16hp-engine. Electric start. New battery. Carb overhaul. Runs great. Call with any questions or cash offers. Need to sell fast. (903).819.1393 Leave message.

SNAP-ON Electric Welder 220V (DALLAS ) $1150

2009-12-30T17:32:52-06:00

I have a Snap-On Welder that I have not used in a long time so i decided to sell instead to someone that will and Im also in need of the money.
Will trade for a nice broke horse for beginners or fencing material or ASKING $1150 Cash Only
Feel free to call if you have any questions 972-693-3087 Cindy
Hablo Espanol

carrollton, farmers branch, addison, dallas, fencing, horse, material, snap on, welder, welding, broke, 1150, 75220

compressor (athens) $1500

2009-12-30T17:32:46-06:00

QUINCY INDUSTRIAL COMPRESSOR ,VOLTS 208-230/460 7.5HP 120 GALLON TANK 3 PHASE
WILL TRADE FOR WIRE FEED WELDER 220 AND UP CAR, TRUCK ,4 WHEELERS ,GUNS
THIS COMPRESSOR RETAILS OVER 6K SO DONT TRY TO TRADE FOR NO JUNK .
903-675-5773 8-5 M-F 9-2 SAT

Tool box for van made by weatherguard (ft.worth) $100

2009-12-30T17:29:07-06:00

30 high x 14 deep x51 wide. Tool box in middle of shelves. call 817-210-9548 for info or pics.

###RIDGID PIPE THREADER### (GRAPEVINE, TX 76051) $50

2009-12-30T17:23:59-06:00

ROGID 1 INCH PIPE THREADER WITH EXTRA SET OF DIES. CALL 817-691-5321

Air Compressor (Gast) (Emory)

2009-12-30T17:17:48-06:00

Like new Gast air compressor. Really nice and clean and mint condition. Cost over $1300.00 new sell for $600.00
Has a 20 gallon heavy duty tank.

call Jimmy 903-473-4252

Electric Chainsaw (colleyville)

2009-12-30T17:17:08-06:00

Sears Craftsman ELECTRIC Chainsaw. 16"/3.5 Peak HP. With E-Z Adjust. $80 firm cash & p/u only. Price is fair. Very good condition - rarely used. 214.674.0506. Have a great day! Will throw in whatever chainsaw oil I find.

Bosch Tile Cutter/Sander (Carrollton) $125

2009-12-30T17:07:48-06:00

New. Still in original box. Includes Sanding Plate, Sanding paper set, 30min charger, HCS Plunge Cut Blade, 2 Litheon Batteries
$125 or OBO 214 883 7783