loading
reading
writing
saving
searching
Belkin Gateway ATT BATTERY BACKUP Rev B BU3DC001-12 - $35 (north dallas)
Dallas North Tollway near Frankford Road
condition: like new
make / manufacturer: Belkin
model name / number: BU3DC001-12
QR Code Link to This Post
Battery backup provides uninterruptible power supply (UPS) to keep critical systems up and running in the event of a power loss. The Belkin Residential Gateway (RG) Battery Backup REV B, BU3DC001-12V designed to maintain ATT U-verse® Residential Gateway and your ATT U-verse® Voice service should disruption to your power service occur. Technical Specifications 3 Amp Max. Input Voltage Range: 0 to 140 VAC Input Frequency: 50/60 Hz Nominal Output Voltage: 12 VDC Max Power: 36W Alarms: Visual and Audible Operating Temperature: 32 to 113 degrees F (0 to 45 degrees Celsius) Typical Battery Recharge Time: 18 hours for a new and fully depleted battery (at normal indoor temperature) Typical Backup Time: four (4) hours (actual results will vary depending on battery age, usage patterns and environmental conditions)
Front Panel -
On A/C (Green, stable) - lights up solid when the RG Battery Backup is operating on A/C power.
Testing Battery (Green, flashing) - flashes when the RG Battery Backup is conducting a self-test. The LED will behave as described if the self-test is initiated manually and periodically thereafter. A self-test procedure will approximately last for five (5) minutes.
On Battery (Yellow, stable) - lights up solid when the RG Battery Backup is operating on battery power. You will hear an alarm tone every 10 seconds but this will automatically shut OFF once A/C power is restored.
Low Battery (Yellow, flashing) - flashes when the battery power is running low. There will be an alarm tone every second until the unit performs a forced shutdown when the battery power is depleted.
Replace Battery (Red, flashing) - may indicate that the battery needs to be replaced immediately. There will be an alarm tone every five (5) seconds when this occurs. You can conduct a self test by observing the alarm tone. If it persists, replace the battery as soon as possible to ensure the proper operation of the RG Battery Backup.
Fault (Red, stable) - lights up solid when a fault takes place. There will be a continuous beep when this occurs. To resolve this, you can reset the unit by powering OFF the unit, disconnecting it from the power outlet then reconnecting it after a few minutes then turning ON the unit again.
Mute switch - used to enable or disable the Mute function of the alarm tone. The alarm tones will be disabled if the switch is set to ON.
Back Panel Power switch - used to power the device ON or OFF.
Complete With NEW Battery 12 V 9AH, AC Power Cord, 12 Volt Power Cord and Plug. Limited Time Offer. See Photos For Details $35. Please Call show contact info to Set Up.
- Do NOT contact this poster with unsolicited services or offers.