favorite
favorite
hide
unhide
flag

Posted

print

Tektronix TM5006 Six-Bay Mainframe w/ Four Power Supplies - $160 (Arlington)

Tektronix TM5006 Six-Bay Mainframe w/ Four Power Supplies 1 thumbnailTektronix TM5006 Six-Bay Mainframe w/ Four Power Supplies 2 thumbnailTektronix TM5006 Six-Bay Mainframe w/ Four Power Supplies 3 thumbnailTektronix TM5006 Six-Bay Mainframe w/ Four Power Supplies 4 thumbnailTektronix TM5006 Six-Bay Mainframe w/ Four Power Supplies 5 thumbnailTektronix TM5006 Six-Bay Mainframe w/ Four Power Supplies 6 thumbnailTektronix TM5006 Six-Bay Mainframe w/ Four Power Supplies 7 thumbnailTektronix TM5006 Six-Bay Mainframe w/ Four Power Supplies 8 thumbnailTektronix TM5006 Six-Bay Mainframe w/ Four Power Supplies 9 thumbnail
Randol Mill Road near Davis
condition: excellent

more ads by this user

Tektronix TM5006 Six-Bay Mainframe w/ Three Techtronix PS503A Dual Power Suppies and one Tektronix PS 501-1 Power Supply.
The PS503A Power Supply provides three outputs: +5 V at 1 A, 0 to +20 V, or 0 to -20 V at 1 A (in high-power compartment of TM504 or TM506) or 400 mA (in any standard mainframe compartment). " Independent + and -controls, or dual tracking voltage control " Requires TM-Series Power Module (sold separately)

The PS503A features superior dual-tracking performance, over-voltage protection, and remote resistance programming of voltage. When operated in a high power compartment of a TM504, TM506, or TM5006, the PS503A provides up to 1A from both 0 to 20V supplies. (400 mA in standard compartment).

Features:
Independent + and - Voltage and Current controls
0V to +/- 20V at 1A (in High Power Compartment)
0V to +/- 20V at 400mA (in Standard Compartment)
Fixed Output 5V at 1A.

Tektronix PS 501-1 Power Supply
Tektronix PS supplies 0 to 20 V (floating) and adjustable current limiting to 400 mA, with constant current operation above the limit setting. The PS 501-1 features precision regulation and better than 2-mV resolution over its voltage range. A muliturn dial with mechanical digital readout provides accurate settings of the output voltage. A fixed +5V supply provides up to 1 A. To be installed in Tektronix TM 500 series mainframe.

The Tektronix TM5006 is a six-bay mainframe with a GPIB interface for the TM5000 system.
The rightmost compartment (slot 6) can supply high-powered plugins.
The DC rails to the plugins are provided by a switch-mode PSU. The supply is not universal input voltage, the input voltage must be set with two internal jumpers. DC rails are 8 V, +26 V, and −26 V. The case has a cooling fan which is connected to the primary of the transformer.
Available options include Opt.02, Rear Inputs, and Opt.10, a set of 19-inch rackmount slides.
For option 02, six BNC connectors and a 50-pin female DD-50 D-sub connector are installed on the rear panel and pin headers soldered internally, but no internal wiring is pre-installed.
The rack-mount kit has different sides compared to the standard model. It is not possible to remove the standard carry handle to install a rack-mount kit. The entire side panel must be swapped.
Specifications
Input Voltage 115 V or 230 V nominal (selected with an internal jumper) with options for high, medium or low (100 V 110 V 120 V) or (200 V 220 V 240 V) using a second internal jumper.
Fan Flow Rate is higher in units with the 02 (rack-mount) option.

post id: 7734200122

posted:

updated:

best of [?]

loading
reading
writing
saving
searching